diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..7af84b9
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,4 @@
+.vscode/**
+*.exe
+
+!*.md
\ No newline at end of file
diff --git a/OLED显示屏/AbsDriveOledFont.h b/OLED显示屏/AbsDriveOledFont.h
new file mode 100644
index 0000000..27485f4
--- /dev/null
+++ b/OLED显示屏/AbsDriveOledFont.h
@@ -0,0 +1,430 @@
+/*
+
+*@版本:v0.1.0
+*/
+#ifndef __OLEDFONT_H
+#define __OLEDFONT_H
+const unsigned char asc2_0806[][6] =
+{
+{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},// sp
+{0x00, 0x00, 0x00, 0x2f, 0x00, 0x00},// !
+{0x00, 0x00, 0x07, 0x00, 0x07, 0x00},// "
+{0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14},// #
+{0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12},// $
+{0x00, 0x62, 0x64, 0x08, 0x13, 0x23},// %
+{0x00, 0x36, 0x49, 0x55, 0x22, 0x50},// &
+{0x00, 0x00, 0x05, 0x03, 0x00, 0x00},// '
+{0x00, 0x00, 0x1c, 0x22, 0x41, 0x00},// (
+{0x00, 0x00, 0x41, 0x22, 0x1c, 0x00},// )
+{0x00, 0x14, 0x08, 0x3E, 0x08, 0x14},// *
+{0x00, 0x08, 0x08, 0x3E, 0x08, 0x08},// +
+{0x00, 0x00, 0x00, 0xA0, 0x60, 0x00},// ,
+{0x00, 0x08, 0x08, 0x08, 0x08, 0x08},// -
+{0x00, 0x00, 0x60, 0x60, 0x00, 0x00},// .
+{0x00, 0x20, 0x10, 0x08, 0x04, 0x02},// /
+{0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E},// 0
+{0x00, 0x00, 0x42, 0x7F, 0x40, 0x00},// 1
+{0x00, 0x42, 0x61, 0x51, 0x49, 0x46},// 2
+{0x00, 0x21, 0x41, 0x45, 0x4B, 0x31},// 3
+{0x00, 0x18, 0x14, 0x12, 0x7F, 0x10},// 4
+{0x00, 0x27, 0x45, 0x45, 0x45, 0x39},// 5
+{0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30},// 6
+{0x00, 0x01, 0x71, 0x09, 0x05, 0x03},// 7
+{0x00, 0x36, 0x49, 0x49, 0x49, 0x36},// 8
+{0x00, 0x06, 0x49, 0x49, 0x29, 0x1E},// 9
+{0x00, 0x00, 0x36, 0x36, 0x00, 0x00},// :
+{0x00, 0x00, 0x56, 0x36, 0x00, 0x00},// ;
+{0x00, 0x08, 0x14, 0x22, 0x41, 0x00},// <
+{0x00, 0x14, 0x14, 0x14, 0x14, 0x14},// =
+{0x00, 0x00, 0x41, 0x22, 0x14, 0x08},// >
+{0x00, 0x02, 0x01, 0x51, 0x09, 0x06},// ?
+{0x00, 0x32, 0x49, 0x59, 0x51, 0x3E},// @
+{0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C},// A
+{0x00, 0x7F, 0x49, 0x49, 0x49, 0x36},// B
+{0x00, 0x3E, 0x41, 0x41, 0x41, 0x22},// C
+{0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C},// D
+{0x00, 0x7F, 0x49, 0x49, 0x49, 0x41},// E
+{0x00, 0x7F, 0x09, 0x09, 0x09, 0x01},// F
+{0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A},// G
+{0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F},// H
+{0x00, 0x00, 0x41, 0x7F, 0x41, 0x00},// I
+{0x00, 0x20, 0x40, 0x41, 0x3F, 0x01},// J
+{0x00, 0x7F, 0x08, 0x14, 0x22, 0x41},// K
+{0x00, 0x7F, 0x40, 0x40, 0x40, 0x40},// L
+{0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F},// M
+{0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F},// N
+{0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E},// O
+{0x00, 0x7F, 0x09, 0x09, 0x09, 0x06},// P
+{0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E},// Q
+{0x00, 0x7F, 0x09, 0x19, 0x29, 0x46},// R
+{0x00, 0x46, 0x49, 0x49, 0x49, 0x31},// S
+{0x00, 0x01, 0x01, 0x7F, 0x01, 0x01},// T
+{0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F},// U
+{0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F},// V
+{0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F},// W
+{0x00, 0x63, 0x14, 0x08, 0x14, 0x63},// X
+{0x00, 0x07, 0x08, 0x70, 0x08, 0x07},// Y
+{0x00, 0x61, 0x51, 0x49, 0x45, 0x43},// Z
+{0x00, 0x00, 0x7F, 0x41, 0x41, 0x00},// [
+{0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55},// 55
+{0x00, 0x00, 0x41, 0x41, 0x7F, 0x00},// ]
+{0x00, 0x04, 0x02, 0x01, 0x02, 0x04},// ^
+{0x00, 0x40, 0x40, 0x40, 0x40, 0x40},// _
+{0x00, 0x00, 0x01, 0x02, 0x04, 0x00},// '
+{0x00, 0x20, 0x54, 0x54, 0x54, 0x78},// a
+{0x00, 0x7F, 0x48, 0x44, 0x44, 0x38},// b
+{0x00, 0x38, 0x44, 0x44, 0x44, 0x20},// c
+{0x00, 0x38, 0x44, 0x44, 0x48, 0x7F},// d
+{0x00, 0x38, 0x54, 0x54, 0x54, 0x18},// e
+{0x00, 0x08, 0x7E, 0x09, 0x01, 0x02},// f
+{0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C},// g
+{0x00, 0x7F, 0x08, 0x04, 0x04, 0x78},// h
+{0x00, 0x00, 0x44, 0x7D, 0x40, 0x00},// i
+{0x00, 0x40, 0x80, 0x84, 0x7D, 0x00},// j
+{0x00, 0x7F, 0x10, 0x28, 0x44, 0x00},// k
+{0x00, 0x00, 0x41, 0x7F, 0x40, 0x00},// l
+{0x00, 0x7C, 0x04, 0x18, 0x04, 0x78},// m
+{0x00, 0x7C, 0x08, 0x04, 0x04, 0x78},// n
+{0x00, 0x38, 0x44, 0x44, 0x44, 0x38},// o
+{0x00, 0xFC, 0x24, 0x24, 0x24, 0x18},// p
+{0x00, 0x18, 0x24, 0x24, 0x18, 0xFC},// q
+{0x00, 0x7C, 0x08, 0x04, 0x04, 0x08},// r
+{0x00, 0x48, 0x54, 0x54, 0x54, 0x20},// s
+{0x00, 0x04, 0x3F, 0x44, 0x40, 0x20},// t
+{0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C},// u
+{0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C},// v
+{0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C},// w
+{0x00, 0x44, 0x28, 0x10, 0x28, 0x44},// x
+{0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C},// y
+{0x00, 0x44, 0x64, 0x54, 0x4C, 0x44},// z
+{0x14, 0x14, 0x14, 0x14, 0x14, 0x14},// horiz lines
+};
+//12*12 ASCII�ַ�������
+const unsigned char asc2_1206[95][12]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
+{0x00,0x00,0xFC,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00},/*"!",1*/
+{0x00,0x0C,0x02,0x0C,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
+{0x90,0xD0,0xBC,0xD0,0xBC,0x90,0x00,0x03,0x00,0x03,0x00,0x00},/*"#",3*/
+{0x18,0x24,0xFE,0x44,0x8C,0x00,0x03,0x02,0x07,0x02,0x01,0x00},/*"$",4*/
+{0x18,0x24,0xD8,0xB0,0x4C,0x80,0x00,0x03,0x00,0x01,0x02,0x01},/*"%",5*/
+{0xC0,0x38,0xE4,0x38,0xE0,0x00,0x01,0x02,0x02,0x01,0x02,0x02},/*"&",6*/
+{0x08,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
+{0x00,0x00,0x00,0xF8,0x04,0x02,0x00,0x00,0x00,0x01,0x02,0x04},/*"(",8*/
+{0x00,0x02,0x04,0xF8,0x00,0x00,0x00,0x04,0x02,0x01,0x00,0x00},/*")",9*/
+{0x90,0x60,0xF8,0x60,0x90,0x00,0x00,0x00,0x01,0x00,0x00,0x00},/*"*",10*/
+{0x20,0x20,0xFC,0x20,0x20,0x00,0x00,0x00,0x01,0x00,0x00,0x00},/*"+",11*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x06,0x00,0x00,0x00,0x00},/*",",12*/
+{0x20,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"-",13*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00},/*".",14*/
+{0x00,0x80,0x60,0x1C,0x02,0x00,0x04,0x03,0x00,0x00,0x00,0x00},/*"/",15*/
+{0xF8,0x04,0x04,0x04,0xF8,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"0",16*/
+{0x00,0x08,0xFC,0x00,0x00,0x00,0x00,0x02,0x03,0x02,0x00,0x00},/*"1",17*/
+{0x18,0x84,0x44,0x24,0x18,0x00,0x03,0x02,0x02,0x02,0x02,0x00},/*"2",18*/
+{0x08,0x04,0x24,0x24,0xD8,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"3",19*/
+{0x40,0xB0,0x88,0xFC,0x80,0x00,0x00,0x00,0x00,0x03,0x02,0x00},/*"4",20*/
+{0x3C,0x24,0x24,0x24,0xC4,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"5",21*/
+{0xF8,0x24,0x24,0x2C,0xC0,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"6",22*/
+{0x0C,0x04,0xE4,0x1C,0x04,0x00,0x00,0x00,0x03,0x00,0x00,0x00},/*"7",23*/
+{0xD8,0x24,0x24,0x24,0xD8,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"8",24*/
+{0x38,0x44,0x44,0x44,0xF8,0x00,0x00,0x03,0x02,0x02,0x01,0x00},/*"9",25*/
+{0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00},/*":",26*/
+{0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00},/*";",27*/
+{0x00,0x20,0x50,0x88,0x04,0x02,0x00,0x00,0x00,0x00,0x01,0x02},/*"<",28*/
+{0x90,0x90,0x90,0x90,0x90,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"=",29*/
+{0x00,0x02,0x04,0x88,0x50,0x20,0x00,0x02,0x01,0x00,0x00,0x00},/*">",30*/
+{0x18,0x04,0xC4,0x24,0x18,0x00,0x00,0x00,0x02,0x00,0x00,0x00},/*"?",31*/
+{0xF8,0x04,0xE4,0x94,0xF8,0x00,0x01,0x02,0x02,0x02,0x02,0x00},/*"@",32*/
+{0x00,0xE0,0x9C,0xF0,0x80,0x00,0x02,0x03,0x00,0x00,0x03,0x02},/*"A",33*/
+{0x04,0xFC,0x24,0x24,0xD8,0x00,0x02,0x03,0x02,0x02,0x01,0x00},/*"B",34*/
+{0xF8,0x04,0x04,0x04,0x0C,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"C",35*/
+{0x04,0xFC,0x04,0x04,0xF8,0x00,0x02,0x03,0x02,0x02,0x01,0x00},/*"D",36*/
+{0x04,0xFC,0x24,0x74,0x0C,0x00,0x02,0x03,0x02,0x02,0x03,0x00},/*"E",37*/
+{0x04,0xFC,0x24,0x74,0x0C,0x00,0x02,0x03,0x02,0x00,0x00,0x00},/*"F",38*/
+{0xF0,0x08,0x04,0x44,0xCC,0x40,0x00,0x01,0x02,0x02,0x01,0x00},/*"G",39*/
+{0x04,0xFC,0x20,0x20,0xFC,0x04,0x02,0x03,0x00,0x00,0x03,0x02},/*"H",40*/
+{0x04,0x04,0xFC,0x04,0x04,0x00,0x02,0x02,0x03,0x02,0x02,0x00},/*"I",41*/
+{0x00,0x04,0x04,0xFC,0x04,0x04,0x06,0x04,0x04,0x03,0x00,0x00},/*"J",42*/
+{0x04,0xFC,0x24,0xD0,0x0C,0x04,0x02,0x03,0x02,0x00,0x03,0x02},/*"K",43*/
+{0x04,0xFC,0x04,0x00,0x00,0x00,0x02,0x03,0x02,0x02,0x02,0x03},/*"L",44*/
+{0xFC,0x3C,0xC0,0x3C,0xFC,0x00,0x03,0x00,0x03,0x00,0x03,0x00},/*"M",45*/
+{0x04,0xFC,0x30,0xC4,0xFC,0x04,0x02,0x03,0x02,0x00,0x03,0x00},/*"N",46*/
+{0xF8,0x04,0x04,0x04,0xF8,0x00,0x01,0x02,0x02,0x02,0x01,0x00},/*"O",47*/
+{0x04,0xFC,0x24,0x24,0x18,0x00,0x02,0x03,0x02,0x00,0x00,0x00},/*"P",48*/
+{0xF8,0x84,0x84,0x04,0xF8,0x00,0x01,0x02,0x02,0x07,0x05,0x00},/*"Q",49*/
+{0x04,0xFC,0x24,0x64,0x98,0x00,0x02,0x03,0x02,0x00,0x03,0x02},/*"R",50*/
+{0x18,0x24,0x24,0x44,0x8C,0x00,0x03,0x02,0x02,0x02,0x01,0x00},/*"S",51*/
+{0x0C,0x04,0xFC,0x04,0x0C,0x00,0x00,0x02,0x03,0x02,0x00,0x00},/*"T",52*/
+{0x04,0xFC,0x00,0x00,0xFC,0x04,0x00,0x01,0x02,0x02,0x01,0x00},/*"U",53*/
+{0x04,0x7C,0x80,0xE0,0x1C,0x04,0x00,0x00,0x03,0x00,0x00,0x00},/*"V",54*/
+{0x1C,0xE0,0x3C,0xE0,0x1C,0x00,0x00,0x03,0x00,0x03,0x00,0x00},/*"W",55*/
+{0x04,0x9C,0x60,0x9C,0x04,0x00,0x02,0x03,0x00,0x03,0x02,0x00},/*"X",56*/
+{0x04,0x1C,0xE0,0x1C,0x04,0x00,0x00,0x02,0x03,0x02,0x00,0x00},/*"Y",57*/
+{0x0C,0x84,0x64,0x1C,0x04,0x00,0x02,0x03,0x02,0x02,0x03,0x00},/*"Z",58*/
+{0x00,0x00,0xFE,0x02,0x02,0x00,0x00,0x00,0x07,0x04,0x04,0x00},/*"[",59*/
+{0x00,0x0E,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x00},/*"\",60*/
+{0x00,0x02,0x02,0xFE,0x00,0x00,0x00,0x04,0x04,0x07,0x00,0x00},/*"]",61*/
+{0x00,0x04,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08},/*"_",63*/
+{0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
+{0x00,0x40,0xA0,0xA0,0xC0,0x00,0x00,0x01,0x02,0x02,0x03,0x02},/*"a",65*/
+{0x04,0xFC,0x20,0x20,0xC0,0x00,0x00,0x03,0x02,0x02,0x01,0x00},/*"b",66*/
+{0x00,0xC0,0x20,0x20,0x60,0x00,0x00,0x01,0x02,0x02,0x02,0x00},/*"c",67*/
+{0x00,0xC0,0x20,0x24,0xFC,0x00,0x00,0x01,0x02,0x02,0x03,0x02},/*"d",68*/
+{0x00,0xC0,0xA0,0xA0,0xC0,0x00,0x00,0x01,0x02,0x02,0x02,0x00},/*"e",69*/
+{0x00,0x20,0xF8,0x24,0x24,0x04,0x00,0x02,0x03,0x02,0x02,0x00},/*"f",70*/
+{0x00,0x40,0xA0,0xA0,0x60,0x20,0x00,0x07,0x0A,0x0A,0x0A,0x04},/*"g",71*/
+{0x04,0xFC,0x20,0x20,0xC0,0x00,0x02,0x03,0x02,0x00,0x03,0x02},/*"h",72*/
+{0x00,0x20,0xE4,0x00,0x00,0x00,0x00,0x02,0x03,0x02,0x00,0x00},/*"i",73*/
+{0x00,0x00,0x20,0xE4,0x00,0x00,0x08,0x08,0x08,0x07,0x00,0x00},/*"j",74*/
+{0x04,0xFC,0x80,0xE0,0x20,0x20,0x02,0x03,0x02,0x00,0x03,0x02},/*"k",75*/
+{0x04,0x04,0xFC,0x00,0x00,0x00,0x02,0x02,0x03,0x02,0x02,0x00},/*"l",76*/
+{0xE0,0x20,0xE0,0x20,0xC0,0x00,0x03,0x00,0x03,0x00,0x03,0x00},/*"m",77*/
+{0x20,0xE0,0x20,0x20,0xC0,0x00,0x02,0x03,0x02,0x00,0x03,0x02},/*"n",78*/
+{0x00,0xC0,0x20,0x20,0xC0,0x00,0x00,0x01,0x02,0x02,0x01,0x00},/*"o",79*/
+{0x20,0xE0,0x20,0x20,0xC0,0x00,0x08,0x0F,0x0A,0x02,0x01,0x00},/*"p",80*/
+{0x00,0xC0,0x20,0x20,0xE0,0x00,0x00,0x01,0x02,0x0A,0x0F,0x08},/*"q",81*/
+{0x20,0xE0,0x40,0x20,0x20,0x00,0x02,0x03,0x02,0x00,0x00,0x00},/*"r",82*/
+{0x00,0x60,0xA0,0xA0,0x20,0x00,0x00,0x02,0x02,0x02,0x03,0x00},/*"s",83*/
+{0x00,0x20,0xF8,0x20,0x00,0x00,0x00,0x00,0x01,0x02,0x02,0x00},/*"t",84*/
+{0x20,0xE0,0x00,0x20,0xE0,0x00,0x00,0x01,0x02,0x02,0x03,0x02},/*"u",85*/
+{0x20,0xE0,0x20,0x80,0x60,0x20,0x00,0x00,0x03,0x01,0x00,0x00},/*"v",86*/
+{0x60,0x80,0xE0,0x80,0x60,0x00,0x00,0x03,0x00,0x03,0x00,0x00},/*"w",87*/
+{0x20,0x60,0x80,0x60,0x20,0x00,0x02,0x03,0x00,0x03,0x02,0x00},/*"x",88*/
+{0x20,0xE0,0x20,0x80,0x60,0x20,0x08,0x08,0x07,0x01,0x00,0x00},/*"y",89*/
+{0x00,0x20,0xA0,0x60,0x20,0x00,0x00,0x02,0x03,0x02,0x02,0x00},/*"z",90*/
+{0x00,0x00,0x20,0xDE,0x02,0x00,0x00,0x00,0x00,0x07,0x04,0x00},/*"{",91*/
+{0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00},/*"|",92*/
+{0x00,0x02,0xDE,0x20,0x00,0x00,0x00,0x04,0x07,0x00,0x00,0x00},/*"}",93*/
+{0x02,0x01,0x02,0x04,0x04,0x02,0x00,0x00,0x00,0x00,0x00,0x00},/*"~",94*/
+};  
+//16*16 ASCII�ַ�������
+const unsigned char asc2_1608[][16]={	  
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
+{0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00},/*"!",1*/
+{0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
+{0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00},/*"#",3*/
+{0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00},/*"$",4*/
+{0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00},/*"%",5*/
+{0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10},/*"&",6*/
+{0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
+{0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00},/*"(",8*/
+{0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00},/*")",9*/
+{0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00},/*"*",10*/
+{0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00},/*"+",11*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00},/*",",12*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01},/*"-",13*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00},/*".",14*/
+{0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00},/*"/",15*/
+{0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00},/*"0",16*/
+{0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"1",17*/
+{0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00},/*"2",18*/
+{0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00},/*"3",19*/
+{0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00},/*"4",20*/
+{0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00},/*"5",21*/
+{0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00},/*"6",22*/
+{0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00},/*"7",23*/
+{0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00},/*"8",24*/
+{0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00},/*"9",25*/
+{0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00},/*":",26*/
+{0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00},/*";",27*/
+{0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00},/*"<",28*/
+{0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00},/*"=",29*/
+{0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00},/*">",30*/
+{0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00},/*"?",31*/
+{0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00},/*"@",32*/
+{0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20},/*"A",33*/
+{0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00},/*"B",34*/
+{0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00},/*"C",35*/
+{0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00},/*"D",36*/
+{0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00},/*"E",37*/
+{0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00},/*"F",38*/
+{0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00},/*"G",39*/
+{0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20},/*"H",40*/
+{0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"I",41*/
+{0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00},/*"J",42*/
+{0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00},/*"K",43*/
+{0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00},/*"L",44*/
+{0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00},/*"M",45*/
+{0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00},/*"N",46*/
+{0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00},/*"O",47*/
+{0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00},/*"P",48*/
+{0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00},/*"Q",49*/
+{0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20},/*"R",50*/
+{0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00},/*"S",51*/
+{0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00},/*"T",52*/
+{0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00},/*"U",53*/
+{0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00},/*"V",54*/
+{0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00},/*"W",55*/
+{0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20},/*"X",56*/
+{0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00},/*"Y",57*/
+{0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00},/*"Z",58*/
+{0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00},/*"[",59*/
+{0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00},/*"\",60*/
+{0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00},/*"]",61*/
+{0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80},/*"_",63*/
+{0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
+{0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20},/*"a",65*/
+{0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00},/*"b",66*/
+{0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00},/*"c",67*/
+{0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20},/*"d",68*/
+{0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00},/*"e",69*/
+{0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"f",70*/
+{0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00},/*"g",71*/
+{0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20},/*"h",72*/
+{0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"i",73*/
+{0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00},/*"j",74*/
+{0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00},/*"k",75*/
+{0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00},/*"l",76*/
+{0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F},/*"m",77*/
+{0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20},/*"n",78*/
+{0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00},/*"o",79*/
+{0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00},/*"p",80*/
+{0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80},/*"q",81*/
+{0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00},/*"r",82*/
+{0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00},/*"s",83*/
+{0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00},/*"t",84*/
+{0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20},/*"u",85*/
+{0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00},/*"v",86*/
+{0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00},/*"w",87*/
+{0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00},/*"x",88*/
+{0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00},/*"y",89*/
+{0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00},/*"z",90*/
+{0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40},/*"{",91*/
+{0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00},/*"|",92*/
+{0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00},/*"}",93*/
+{0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"~",94*/
+};  
+//24*24 ASICII�ַ�������
+const unsigned char asc2_2412[][36]={	  
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*" ",0*/
+{0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x7F,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00},/*"!",1*/
+{0x00,0x00,0x80,0x60,0x30,0x1C,0x8C,0x60,0x30,0x1C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*""",2*/
+{0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x86,0xE6,0x9F,0x86,0x86,0x86,0x86,0xE6,0x9F,0x86,0x00,0x00,0x01,0x1F,0x01,0x01,0x01,0x01,0x01,0x1F,0x01,0x01,0x00},/*"#",3*/
+{0x00,0x00,0x80,0xC0,0x60,0x20,0xF8,0x20,0xE0,0xC0,0x00,0x00,0x00,0x00,0x03,0x07,0x0C,0x18,0xFF,0x70,0xE1,0x81,0x00,0x00,0x00,0x00,0x07,0x0F,0x10,0x10,0x7F,0x10,0x0F,0x07,0x00,0x00},/*"$",4*/
+{0x80,0x60,0x20,0x60,0x80,0x00,0x00,0x00,0xE0,0x20,0x00,0x00,0x0F,0x30,0x20,0x30,0x9F,0x70,0xDC,0x37,0x10,0x30,0xC0,0x00,0x00,0x00,0x10,0x0E,0x03,0x00,0x07,0x18,0x10,0x18,0x07,0x00},/*"%",5*/
+{0x00,0x00,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x80,0xE0,0x1F,0x38,0xE8,0x87,0x03,0xC4,0x3C,0x04,0x00,0x00,0x07,0x0F,0x18,0x10,0x10,0x0B,0x07,0x0D,0x10,0x10,0x08,0x00},/*"&",6*/
+{0x00,0x80,0x8C,0x4C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"'",7*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xE0,0x30,0x08,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFF,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x18,0x20,0x40,0x00},/*"(",8*/
+{0x00,0x04,0x08,0x30,0xE0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x0F,0x03,0x00,0x00,0x00,0x00,0x00,0x00},/*")",9*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x42,0x66,0x66,0x3C,0x18,0xFF,0x18,0x3C,0x66,0x66,0x42,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00},/*"*",10*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00},/*"+",11*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x8C,0x4C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*",",12*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"-",13*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*".",14*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0x38,0x0C,0x00,0x00,0x00,0x00,0x00,0x80,0x70,0x1C,0x03,0x00,0x00,0x00,0x00,0x00,0x60,0x38,0x0E,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"/",15*/
+{0x00,0x00,0x80,0xC0,0x60,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0xFE,0xFF,0x01,0x00,0x00,0x00,0x00,0x01,0xFF,0xFE,0x00,0x00,0x01,0x07,0x0E,0x18,0x10,0x10,0x18,0x0E,0x07,0x01,0x00},/*"0",16*/
+{0x00,0x00,0x80,0x80,0x80,0xC0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00},/*"1",17*/
+{0x00,0x80,0x40,0x20,0x20,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x03,0x03,0x00,0x80,0x40,0x20,0x38,0x1F,0x07,0x00,0x00,0x00,0x1C,0x1A,0x19,0x18,0x18,0x18,0x18,0x18,0x1F,0x00,0x00},/*"2",18*/
+{0x00,0x80,0xC0,0x20,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,0x03,0x03,0x00,0x10,0x10,0x18,0x2F,0xE7,0x80,0x00,0x00,0x00,0x07,0x0F,0x10,0x10,0x10,0x10,0x18,0x0F,0x07,0x00,0x00},/*"3",19*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xE0,0xF0,0x00,0x00,0x00,0x00,0xC0,0xB0,0x88,0x86,0x81,0x80,0xFF,0xFF,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x1F,0x1F,0x10,0x10,0x00},/*"4",20*/
+{0x00,0x00,0xE0,0x60,0x60,0x60,0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x00,0x3F,0x10,0x08,0x08,0x08,0x18,0xF0,0xE0,0x00,0x00,0x00,0x07,0x0B,0x10,0x10,0x10,0x10,0x1C,0x0F,0x03,0x00,0x00},/*"5",21*/
+{0x00,0x00,0x80,0xC0,0x40,0x20,0x20,0x20,0xE0,0xC0,0x00,0x00,0x00,0xFC,0xFF,0x21,0x10,0x08,0x08,0x08,0x18,0xF0,0xE0,0x00,0x00,0x01,0x07,0x0C,0x18,0x10,0x10,0x10,0x08,0x0F,0x03,0x00},/*"6",22*/
+{0x00,0x00,0xC0,0xE0,0x60,0x60,0x60,0x60,0x60,0xE0,0x60,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xE0,0x18,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00},/*"7",23*/
+{0x00,0x80,0xC0,0x60,0x20,0x20,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x87,0xEF,0x2C,0x18,0x18,0x30,0x30,0x68,0xCF,0x83,0x00,0x00,0x07,0x0F,0x08,0x10,0x10,0x10,0x10,0x18,0x0F,0x07,0x00},/*"8",24*/
+{0x00,0x00,0xC0,0xC0,0x20,0x20,0x20,0x20,0xC0,0x80,0x00,0x00,0x00,0x1F,0x3F,0x60,0x40,0x40,0x40,0x20,0x10,0xFF,0xFE,0x00,0x00,0x00,0x0C,0x1C,0x10,0x10,0x10,0x08,0x0F,0x03,0x00,0x00},/*"9",25*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x0E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00},/*":",26*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x38,0x00,0x00,0x00,0x00,0x00},/*";",27*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x20,0x10,0x00,0x00,0x00,0x10,0x28,0x44,0x82,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00},/*"<",28*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"=",29*/
+{0x00,0x00,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x82,0x44,0x28,0x10,0x00,0x00,0x00,0x10,0x08,0x04,0x02,0x01,0x00,0x00,0x00,0x00,0x00},/*">",30*/
+{0x00,0xC0,0x20,0x20,0x10,0x10,0x10,0x10,0x30,0xE0,0xC0,0x00,0x00,0x03,0x03,0x00,0x00,0xF0,0x10,0x08,0x0C,0x07,0x03,0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00},/*"?",31*/
+{0x00,0x00,0x00,0xC0,0x40,0x60,0x20,0x20,0x20,0x40,0xC0,0x00,0x00,0xFC,0xFF,0x01,0xF0,0x0E,0x03,0xC1,0xFE,0x03,0x80,0x7F,0x00,0x01,0x07,0x0E,0x08,0x11,0x11,0x10,0x11,0x09,0x04,0x02},/*"@",32*/
+{0x00,0x00,0x00,0x00,0x80,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x7C,0x43,0x40,0x47,0x7F,0xF8,0x80,0x00,0x00,0x10,0x18,0x1F,0x10,0x00,0x00,0x00,0x00,0x13,0x1F,0x1C,0x10},/*"A",33*/
+{0x20,0xE0,0xE0,0x20,0x20,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0xFF,0xFF,0x10,0x10,0x10,0x10,0x18,0x2F,0xE7,0x80,0x00,0x10,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x18,0x0F,0x07,0x00},/*"B",34*/
+{0x00,0x00,0x80,0xC0,0x40,0x20,0x20,0x20,0x20,0x60,0xE0,0x00,0x00,0xFC,0xFF,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,0x07,0x0E,0x18,0x10,0x10,0x10,0x08,0x04,0x03,0x00},/*"C",35*/
+{0x20,0xE0,0xE0,0x20,0x20,0x20,0x20,0x40,0xC0,0x80,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0xFE,0x00,0x10,0x1F,0x1F,0x10,0x10,0x10,0x18,0x08,0x0E,0x07,0x01,0x00},/*"D",36*/
+{0x20,0xE0,0xE0,0x20,0x20,0x20,0x20,0x20,0x20,0x60,0x80,0x00,0x00,0xFF,0xFF,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x10,0x18,0x06,0x00},/*"E",37*/
+{0x20,0xE0,0xE0,0x20,0x20,0x20,0x20,0x20,0x60,0x60,0x80,0x00,0x00,0xFF,0xFF,0x10,0x10,0x10,0x10,0x7C,0x00,0x00,0x01,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"F",38*/
+{0x00,0x00,0x80,0xC0,0x60,0x20,0x20,0x20,0x40,0xE0,0x00,0x00,0x00,0xFC,0xFF,0x01,0x00,0x00,0x40,0x40,0xC0,0xC1,0x40,0x40,0x00,0x01,0x07,0x0E,0x18,0x10,0x10,0x10,0x0F,0x0F,0x00,0x00},/*"G",39*/
+{0x20,0xE0,0xE0,0x20,0x00,0x00,0x00,0x00,0x20,0xE0,0xE0,0x20,0x00,0xFF,0xFF,0x10,0x10,0x10,0x10,0x10,0x10,0xFF,0xFF,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10},/*"H",40*/
+{0x00,0x00,0x20,0x20,0x20,0xE0,0xE0,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00},/*"I",41*/
+{0x00,0x00,0x00,0x00,0x20,0x20,0x20,0xE0,0xE0,0x20,0x20,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x60,0xE0,0x80,0x80,0x80,0xC0,0x7F,0x3F,0x00,0x00,0x00},/*"J",42*/
+{0x20,0xE0,0xE0,0x20,0x00,0x00,0x20,0xA0,0x60,0x20,0x20,0x00,0x00,0xFF,0xFF,0x30,0x18,0x7C,0xE3,0xC0,0x00,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x01,0x13,0x1F,0x1C,0x18,0x10},/*"K",43*/
+{0x20,0xE0,0xE0,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x10,0x18,0x06,0x00},/*"L",44*/
+{0x20,0xE0,0xE0,0xE0,0x00,0x00,0x00,0x00,0xE0,0xE0,0xE0,0x20,0x00,0xFF,0x01,0x3F,0xFE,0xC0,0xE0,0x1E,0x01,0xFF,0xFF,0x00,0x10,0x1F,0x10,0x00,0x03,0x1F,0x03,0x00,0x10,0x1F,0x1F,0x10},/*"M",45*/
+{0x20,0xE0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x20,0xE0,0x20,0x00,0xFF,0x00,0x03,0x07,0x1C,0x78,0xE0,0x80,0x00,0xFF,0x00,0x10,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x00},/*"N",46*/
+{0x00,0x00,0x80,0xC0,0x60,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0xFE,0xFF,0x01,0x00,0x00,0x00,0x00,0x00,0xFF,0xFE,0x00,0x00,0x01,0x07,0x0E,0x18,0x10,0x10,0x18,0x0C,0x07,0x01,0x00},/*"O",47*/
+{0x20,0xE0,0xE0,0x20,0x20,0x20,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x20,0x20,0x20,0x20,0x20,0x30,0x1F,0x0F,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"P",48*/
+{0x00,0x00,0x80,0xC0,0x60,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0x00,0xFE,0xFF,0x01,0x00,0x00,0x00,0x00,0x00,0xFF,0xFE,0x00,0x00,0x01,0x07,0x0E,0x11,0x11,0x13,0x3C,0x7C,0x67,0x21,0x00},/*"Q",49*/
+{0x20,0xE0,0xE0,0x20,0x20,0x20,0x20,0x20,0x60,0xC0,0x80,0x00,0x00,0xFF,0xFF,0x10,0x10,0x30,0xF0,0xD0,0x08,0x0F,0x07,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x00,0x03,0x0F,0x1C,0x10,0x10},/*"R",50*/
+{0x00,0x80,0xC0,0x60,0x20,0x20,0x20,0x20,0x40,0x40,0xE0,0x00,0x00,0x07,0x0F,0x0C,0x18,0x18,0x30,0x30,0x60,0xE0,0x81,0x00,0x00,0x1F,0x0C,0x08,0x10,0x10,0x10,0x10,0x18,0x0F,0x07,0x00},/*"S",51*/
+{0x80,0x60,0x20,0x20,0x20,0xE0,0xE0,0x20,0x20,0x20,0x60,0x80,0x01,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00},/*"T",52*/
+{0x20,0xE0,0xE0,0x20,0x00,0x00,0x00,0x00,0x00,0x20,0xE0,0x20,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x07,0x0F,0x18,0x10,0x10,0x10,0x10,0x10,0x08,0x07,0x00},/*"U",53*/
+{0x20,0x60,0xE0,0xE0,0x20,0x00,0x00,0x00,0x20,0xE0,0x60,0x20,0x00,0x00,0x07,0x7F,0xF8,0x80,0x00,0x80,0x7C,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x1F,0x1C,0x07,0x00,0x00,0x00,0x00},/*"V",54*/
+{0x20,0xE0,0xE0,0x20,0x00,0xE0,0xE0,0x20,0x00,0x20,0xE0,0x20,0x00,0x07,0xFF,0xF8,0xE0,0x1F,0xFF,0xFC,0xE0,0x1F,0x00,0x00,0x00,0x00,0x03,0x1F,0x03,0x00,0x01,0x1F,0x03,0x00,0x00,0x00},/*"W",55*/
+{0x00,0x20,0x60,0xE0,0xA0,0x00,0x00,0x20,0xE0,0x60,0x20,0x00,0x00,0x00,0x00,0x03,0x8F,0x7C,0xF8,0xC6,0x01,0x00,0x00,0x00,0x00,0x10,0x18,0x1E,0x13,0x00,0x01,0x17,0x1F,0x18,0x10,0x00},/*"X",56*/
+{0x20,0x60,0xE0,0xE0,0x20,0x00,0x00,0x00,0x20,0xE0,0x60,0x20,0x00,0x00,0x01,0x07,0x3E,0xF8,0xE0,0x18,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x1F,0x1F,0x10,0x10,0x00,0x00,0x00},/*"Y",57*/
+{0x00,0x80,0x60,0x20,0x20,0x20,0x20,0xA0,0xE0,0xE0,0x20,0x00,0x00,0x00,0x00,0x00,0xC0,0xF0,0x3E,0x0F,0x03,0x00,0x00,0x00,0x00,0x10,0x1C,0x1F,0x17,0x10,0x10,0x10,0x10,0x18,0x06,0x00},/*"Z",58*/
+{0x00,0x00,0x00,0x00,0x00,0xFC,0x04,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x40,0x40,0x00},/*"[",59*/
+{0x00,0x00,0x10,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x1C,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0C,0x70,0x80,0x00},/*"\",60*/
+{0x00,0x00,0x04,0x04,0x04,0x04,0x04,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,0x00},/*"]",61*/
+{0x00,0x00,0x00,0x10,0x08,0x0C,0x04,0x0C,0x08,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"^",62*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80},/*"_",63*/
+{0x00,0x00,0x00,0x04,0x04,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"`",64*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x98,0xD8,0x44,0x64,0x24,0x24,0xFC,0xF8,0x00,0x00,0x00,0x0F,0x1F,0x18,0x10,0x10,0x10,0x08,0x1F,0x1F,0x10,0x18},/*"a",65*/
+{0x00,0x20,0xE0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x18,0x08,0x04,0x04,0x0C,0xF8,0xF0,0x00,0x00,0x00,0x1F,0x0F,0x18,0x10,0x10,0x10,0x18,0x0F,0x03,0x00},/*"b",66*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF8,0x18,0x04,0x04,0x04,0x3C,0x38,0x00,0x00,0x00,0x00,0x03,0x0F,0x0C,0x10,0x10,0x10,0x10,0x08,0x06,0x00,0x00},/*"c",67*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xE0,0xF0,0x00,0x00,0x00,0xE0,0xF8,0x1C,0x04,0x04,0x04,0x08,0xFF,0xFF,0x00,0x00,0x00,0x03,0x0F,0x18,0x10,0x10,0x10,0x08,0x1F,0x0F,0x08,0x00},/*"d",68*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF8,0x48,0x44,0x44,0x44,0x4C,0x78,0x70,0x00,0x00,0x00,0x03,0x0F,0x0C,0x18,0x10,0x10,0x10,0x08,0x04,0x00},/*"e",69*/
+{0x00,0x00,0x00,0x00,0x80,0xC0,0x60,0x20,0x20,0xE0,0xC0,0x00,0x00,0x04,0x04,0x04,0xFF,0xFF,0x04,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00,0x00},/*"f",70*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0xF8,0x8C,0x04,0x04,0x8C,0xF8,0x74,0x04,0x0C,0x00,0x70,0x76,0xCF,0x8D,0x8D,0x8D,0x89,0xC8,0x78,0x70,0x00},/*"g",71*/
+{0x00,0x20,0xE0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x08,0x04,0x04,0x04,0xFC,0xF8,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x10,0x1F,0x1F,0x10,0x00},/*"h",72*/
+{0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00},/*"i",73*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0x80,0x80,0xC0,0x7F,0x3F,0x00,0x00,0x00},/*"j",74*/
+{0x00,0x20,0xE0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x80,0xC0,0xF4,0x1C,0x04,0x04,0x00,0x00,0x00,0x10,0x1F,0x1F,0x11,0x00,0x03,0x1F,0x1C,0x10,0x10,0x00},/*"k",75*/
+{0x00,0x00,0x20,0x20,0x20,0xE0,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00},/*"l",76*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0xFC,0xFC,0x08,0x04,0xFC,0xFC,0x08,0x04,0xFC,0xFC,0x00,0x10,0x1F,0x1F,0x10,0x00,0x1F,0x1F,0x10,0x00,0x1F,0x1F,0x10},/*"m",77*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0xFC,0xFC,0x08,0x08,0x04,0x04,0xFC,0xF8,0x00,0x00,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x10,0x1F,0x1F,0x10,0x00},/*"n",78*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF0,0x18,0x0C,0x04,0x04,0x0C,0x18,0xF0,0xE0,0x00,0x00,0x03,0x0F,0x0C,0x10,0x10,0x10,0x10,0x0C,0x0F,0x03,0x00},/*"o",79*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0xFC,0xFC,0x08,0x04,0x04,0x04,0x0C,0xF8,0xF0,0x00,0x00,0x80,0xFF,0xFF,0x88,0x90,0x10,0x10,0x1C,0x0F,0x03,0x00},/*"p",80*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF8,0x1C,0x04,0x04,0x04,0x08,0xF8,0xFC,0x00,0x00,0x00,0x03,0x0F,0x18,0x10,0x10,0x90,0x88,0xFF,0xFF,0x80,0x00},/*"q",81*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0xFC,0xFC,0x10,0x08,0x04,0x04,0x0C,0x0C,0x00,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x00,0x00,0x00,0x00},/*"r",82*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x78,0xCC,0xC4,0x84,0x84,0x84,0x0C,0x1C,0x00,0x00,0x00,0x1E,0x18,0x10,0x10,0x10,0x11,0x19,0x0F,0x06,0x00},/*"s",83*/
+{0x00,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x04,0xFF,0xFF,0x04,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x1F,0x10,0x10,0x10,0x0C,0x00,0x00},/*"t",84*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0xFC,0xFE,0x00,0x00,0x00,0x04,0xFC,0xFE,0x00,0x00,0x00,0x00,0x0F,0x1F,0x18,0x10,0x10,0x08,0x1F,0x0F,0x08,0x00},/*"u",85*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x0C,0x3C,0xFC,0xC4,0x00,0x00,0xC4,0x3C,0x0C,0x04,0x00,0x00,0x00,0x00,0x01,0x0F,0x1E,0x0E,0x01,0x00,0x00,0x00},/*"v",86*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x3C,0xFC,0xC4,0x00,0xE4,0x7C,0xFC,0x84,0x80,0x7C,0x04,0x00,0x00,0x07,0x1F,0x07,0x00,0x00,0x07,0x1F,0x07,0x00,0x00},/*"w",87*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x04,0x1C,0x7C,0xE4,0xC0,0x34,0x1C,0x04,0x04,0x00,0x00,0x10,0x10,0x1C,0x16,0x01,0x13,0x1F,0x1C,0x18,0x10,0x00},/*"x",88*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x0C,0x3C,0xFC,0xC4,0x00,0xC4,0x3C,0x04,0x04,0x00,0x00,0x00,0xC0,0x80,0xC1,0x37,0x0E,0x01,0x00,0x00,0x00,0x00},/*"y",89*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x04,0x04,0xC4,0xF4,0x7C,0x1C,0x04,0x00,0x00,0x00,0x00,0x10,0x1C,0x1F,0x17,0x11,0x10,0x10,0x18,0x0E,0x00},/*"z",90*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x28,0xEF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x60,0x40,0x00,0x00},/*"{",91*/
+{0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00},/*"|",92*/
+{0x00,0x00,0x04,0x0C,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xEF,0x28,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x60,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"}",93*/
+{0x00,0x18,0x06,0x02,0x02,0x04,0x08,0x10,0x20,0x20,0x30,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"~",94*/
+
+
+
+};
+const unsigned char Hzk1[][32]={
+{0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00,0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x0F,0x00,0x00,0x00},/*"��",0*/
+{0x40,0x40,0x40,0x5F,0x55,0x55,0x55,0x75,0x55,0x55,0x55,0x5F,0x40,0x40,0x40,0x00,0x00,0x40,0x20,0x0F,0x09,0x49,0x89,0x79,0x09,0x09,0x09,0x0F,0x20,0x40,0x00,0x00},/*"��",1*/
+{0x00,0xFE,0x02,0x42,0x4A,0xCA,0x4A,0x4A,0xCA,0x4A,0x4A,0x42,0x02,0xFE,0x00,0x00,0x00,0xFF,0x40,0x50,0x4C,0x43,0x40,0x40,0x4F,0x50,0x50,0x5C,0x40,0xFF,0x00,0x00},/*"԰",2*/
+{0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00,0x00,0x00,0x1F,0x08,0x08,0x08,0x08,0x7F,0x88,0x88,0x88,0x88,0x9F,0x80,0xF0,0x00},/*"��",3*/
+{0x80,0x82,0x82,0x82,0x82,0x82,0x82,0xE2,0xA2,0x92,0x8A,0x86,0x82,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"��",4*/
+{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00,0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"��",5*/
+{0x00,0x10,0x10,0x10,0x10,0xD0,0x30,0xFF,0x30,0xD0,0x12,0x1C,0x10,0x10,0x00,0x00,0x10,0x08,0x04,0x02,0x01,0x00,0x00,0xFF,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00},/*"��",6*/
+{0x04,0x04,0x04,0x84,0xE4,0x3C,0x27,0x24,0x24,0x24,0x24,0xE4,0x04,0x04,0x04,0x00,0x04,0x02,0x01,0x00,0xFF,0x09,0x09,0x09,0x09,0x49,0x89,0x7F,0x00,0x00,0x00,0x00},/*"��",7*/
+{0x00,0xFE,0x22,0x5A,0x86,0x00,0xFE,0x92,0x92,0x92,0x92,0x92,0xFE,0x00,0x00,0x00,0x00,0xFF,0x04,0x08,0x07,0x00,0xFF,0x40,0x20,0x03,0x0C,0x14,0x22,0x41,0x40,0x00},/*"��",8*/
+{0x00,0x80,0x40,0x20,0x18,0x06,0x80,0x00,0x07,0x18,0x20,0x40,0x80,0x00,0x00,0x00,0x01,0x00,0x20,0x70,0x28,0x26,0x21,0x20,0x20,0x24,0x38,0x60,0x00,0x01,0x01,0x00},/*"��",9*/
+{0x00,0x10,0x12,0x92,0x92,0x92,0x92,0x92,0x92,0x12,0x12,0x02,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x10,0x10,0x10,0x10,0x3F,0x00,0x40,0x80,0x7F,0x00,0x00,0x00},/*"˾",10*/
+
+
+
+};
+const unsigned char Hzk2[][72]={
+{0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xFC,0x84,0x80,0x80,0x80,0x80,0x80,0x80,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x7F,0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"��",0*/
+
+};
+const unsigned char Hzk3[][128]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFE,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0xFF,0xFF,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0xFF,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0xFF,0xFF,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"��",0*/
+
+
+};
+
+const unsigned char Hzk4[][512]={
+{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0xF8,0xF0,0xF0,0x70,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFE,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0xFF,0xFF,0xFF,0xFF,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0x06,0xFF,0xFF,0xFF,0xFF,0x07,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0xFF,0xFF,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x0F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"��",0*/
+
+};
+#endif
+
diff --git a/OLED显示屏/AbsDrive_OLED.c b/OLED显示屏/AbsDrive_OLED.c
index 7758695..cf43060 100644
--- a/OLED显示屏/AbsDrive_OLED.c
+++ b/OLED显示屏/AbsDrive_OLED.c
@@ -3,13 +3,15 @@
 * 联系：321640253@qq.com
 * 描述：抽象硬件OLED屏幕，只需要实现指定的抽象函数，即可使用
 * 使用：1、根据配置区，在抽象实现区按照要求实现对应函数
+*@版本:v0.1.0
 */
 
 #include "AbsDrive_OLED.h"
 #include "AbsDriveOledFont.h"
 
-/**************************抽象实现区************************************/
+/**************************抽象实现区(BEGIN)************************************/
 
+#if (defined ABSDrive_4SPI)||(defined ABSDrive_3SPI)||(defined ABSDrive_HardIIC)||(defined ABSDrive_SoftIIC)
 /*抽象函数：写字节
 *要求1：实现一个写入多个字节的函数
 *要求2：返回一个AbsDriveOLED_STATE类型的状态
@@ -18,20 +20,38 @@
 */
 static AbsDriveOLED_STATE AbsOledWriteByte(u8 *_data,u8 _size){
 	/********************请实现抽象写字节函数********************/
-
+	HAL_I2C_Master_Transmit(&hi2c1,ABS_OLED_ADDR,_data,_size,1000);
 	/********************请实现抽象写字节函数********************/
 	return ABS_OLED_OK;
 }
+#endif
 
+
+#ifdef Enable_ABS_OLED_RES
 /*抽象函数：复位信号函数
 *要求1：根据电平值设置复位引脚电平
 *参数1：electrical_level:电平值，1、高电平；0、低电平
 */
 static void AbsDriveOLED_RES(u8 electrical_level){
 	/********************请实现抽象复位信号函数********************/
-
+	if(electrical_level)HAL_GPIO_WritePin(OLED_RES_GPIO_Port,OLED_RES_Pin,GPIO_PIN_SET);
+	else HAL_GPIO_WritePin(OLED_RES_GPIO_Port,OLED_RES_Pin,GPIO_PIN_RESET);
 	/********************请实现抽象复位信号函数********************/
 }
+#endif
+
+#ifdef Enable_ABS_OLED_DC
+/*抽象函数：DC命令信号函数
+*要求1：根据电平值设置DC引脚电平
+*参数1：electrical_level:电平值，1、高电平；0、低电平
+*/
+static void AbsDriveOLED_DC(u8 electrical_level){
+	/********************请实现抽象DC命令信号函数********************/
+	if(electrical_level)HAL_GPIO_WritePin(OLED_DC_GPIO_Port,OLED_DC_Pin,GPIO_PIN_SET);
+	else HAL_GPIO_WritePin(OLED_DC_GPIO_Port,OLED_DC_Pin,GPIO_PIN_RESET);
+	/********************请实现抽象DC命令信号函数********************/
+}
+#endif
 
 #ifdef Enable_ABS_OLED_Delay
 /*抽象函数：延时函数
@@ -45,7 +65,7 @@ static void AbsOledDelay(u32 t){
 }
 #endif 
 
-/**************************抽象实现区************************************/
+/**************************抽象实现区(END)**************************************/
 
 
 
@@ -61,7 +81,7 @@ u8 ABS_OLED_GRAM[ABS_OLED_WIDTH][ABS_OLED_PAGE_SIZE];			//定义显存
 */
 AbsDriveOLED_STATE AbsOledWriteCMD(u8 ABScmd){
 	#ifdef ABSDrive_4SPI
-	HAL_GPIO_WritePin(oled_cs_GPIO_Port, oled_cs_Pin, GPIO_PIN_RESET);
+	AbsDriveOLED_DC(0);
 	if(AbsOledWriteByte(&ABScmd,1)==ABS_OLED_OK)return ABS_OLED_OK;
 	#endif
 	
@@ -69,6 +89,13 @@ AbsDriveOLED_STATE AbsOledWriteCMD(u8 ABScmd){
 	
 	#endif
 	
+	#if (defined ABSDrive_HardIIC)||(defined ABSDrive_SoftIIC)
+	u8 pdata[2];
+	pdata[0]=0x00;
+	pdata[1]=ABScmd;
+	AbsOledWriteByte(pdata,2);
+	#endif
+	
 	return ABS_OLED_ERROR;
 }
 
@@ -80,7 +107,7 @@ AbsDriveOLED_STATE AbsOledWriteCMD(u8 ABScmd){
 */
 AbsDriveOLED_STATE AbsOledWriteDATA(u8 ABSdata){
 	#ifdef ABSDrive_4SPI
-	HAL_GPIO_WritePin(oled_cs_GPIO_Port, oled_cs_Pin, GPIO_PIN_SET);
+	AbsDriveOLED_DC(1);
 	if(AbsOledWriteByte(&ABSdata,1)==ABS_OLED_OK)return ABS_OLED_OK;
 	#endif
 	
@@ -88,6 +115,12 @@ AbsDriveOLED_STATE AbsOledWriteDATA(u8 ABSdata){
 	
 	#endif
 	
+	#if (defined ABSDrive_HardIIC)||(defined ABSDrive_SoftIIC)
+	u8 pdata[2];
+	pdata[0]=0x40;
+	pdata[1]=ABSdata;
+	AbsOledWriteByte(pdata,2);
+	#endif
 	return ABS_OLED_ERROR;
 }
 
@@ -110,7 +143,7 @@ void ABS_OLED_Refresh(void)
 }
 
 
-void OLED_ColorTurn(u8 i)
+void ABS_OLED_ColorTurn(u8 i)
 {
 	if(i==0)
 		{
@@ -123,7 +156,7 @@ void OLED_ColorTurn(u8 i)
 }
 
 
-void OLED_DisplayTurn(u8 i)
+void ABS_OLED_DisplayTurn(u8 i)
 {
 	if(i==0)
 		{
@@ -138,7 +171,7 @@ void OLED_DisplayTurn(u8 i)
 }
 
 
-void OLED_DisPlay_On(void)
+void ABS_OLED_DisPlay_On(void)
 {
 	AbsOledWriteCMD(0x8D);
 	AbsOledWriteCMD(0x14);
@@ -146,7 +179,7 @@ void OLED_DisPlay_On(void)
 }
 
 
-void OLED_DisPlay_Off(void)
+void ABS_OLED_DisPlay_Off(void)
 {
 	AbsOledWriteCMD(0x8D);
 	AbsOledWriteCMD(0x10);
@@ -155,8 +188,10 @@ void OLED_DisPlay_Off(void)
 
 
 
-
-void OLED_Clear(void)
+/*函数：ABS_OLED_Clear
+**描述：清空屏幕显存并刷新屏幕
+*/
+void ABS_OLED_Clear(void)
 {
 	u8 i,n;
 	for(i=0;i<8;i++)
@@ -169,17 +204,20 @@ void OLED_Clear(void)
 	ABS_OLED_Refresh();
 }
 
-//���� 
-//x:0~127
-//y:0~63
-//t:1 ��� 0,���	
-void OLED_DrawPoint(u8 x,u8 y,u8 t)
+
+/*函数：ABS_OLED_DrawPoint
+**描述：按照坐标绘制一个点
+**参数1：x：x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y：y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：mode:绘制模式，1：填充；0：清空 
+*/
+void ABS_OLED_DrawPoint(u8 x,u8 y,u8 mode)
 {
 	u8 i,m,n;
 	i=y/8;
 	m=y%8;
 	n=1<<m;
-	if(t){ABS_OLED_GRAM[x][i]|=n;}
+	if(mode){ABS_OLED_GRAM[x][i]|=n;}
 	else
 	{
 		ABS_OLED_GRAM[x][i]=~ABS_OLED_GRAM[x][i];
@@ -188,29 +226,34 @@ void OLED_DrawPoint(u8 x,u8 y,u8 t)
 	}
 }
 
-//����
-//x1,y1:�������
-//x2,y2:��������
-void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode)
+/*函数：ABS_OLED_DrawLine
+**描述：按照起始坐标和结束坐标绘制直线
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：x2：结束x坐标	取值返回小于ABS_OLED_WIDTH
+**参数4：y2：结束y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数5：mode:绘制模式，1：填充；0：清空 
+*/
+void ABS_OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode)
 {
 	u16 t; 
 	int xerr=0,yerr=0,delta_x,delta_y,distance;
 	int incx,incy,uRow,uCol;
-	delta_x=x2-x1; //������������ 
+	delta_x=x2-x1; 
 	delta_y=y2-y1;
-	uRow=x1;//�����������
+	uRow=x1;
 	uCol=y1;
-	if(delta_x>0)incx=1; //���õ������� 
-	else if (delta_x==0)incx=0;//��ֱ�� 
+	if(delta_x>0)incx=1; 
+	else if (delta_x==0)incx=0;
 	else {incx=-1;delta_x=-delta_x;}
 	if(delta_y>0)incy=1;
-	else if (delta_y==0)incy=0;//ˮƽ�� 
+	else if (delta_y==0)incy=0;
 	else {incy=-1;delta_y=-delta_x;}
-	if(delta_x>delta_y)distance=delta_x; //ѡȡ�������������� 
+	if(delta_x>delta_y)distance=delta_x;
 	else distance=delta_y;
 	for(t=0;t<distance+1;t++)
 	{
-		OLED_DrawPoint(uRow,uCol,mode);//����
+		ABS_OLED_DrawPoint(uRow,uCol,mode);
 		xerr+=delta_x;
 		yerr+=delta_y;
 		if(xerr>distance)
@@ -225,27 +268,31 @@ void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode)
 		}
 	}
 }
-//x,y:Բ������
-//r:Բ�İ뾶
-void OLED_DrawCircle(u8 x,u8 y,u8 r)
+/*函数：ABS_OLED_DrawCircle
+**描述：按照中心坐标绘制半径r的圆
+**参数1：x：中心x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y：中心y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：mode:绘制模式，1：填充；0：清空 
+*/
+void ABS_OLED_DrawCircle(u8 x,u8 y,u8 r)
 {
 	int a, b,num;
     a = 0;
     b = r;
     while(2 * b * b >= r * r)      
     {
-        OLED_DrawPoint(x + a, y - b,1);
-        OLED_DrawPoint(x - a, y - b,1);
-        OLED_DrawPoint(x - a, y + b,1);
-        OLED_DrawPoint(x + a, y + b,1);
+        ABS_OLED_DrawPoint(x + a, y - b,1);
+        ABS_OLED_DrawPoint(x - a, y - b,1);
+        ABS_OLED_DrawPoint(x - a, y + b,1);
+        ABS_OLED_DrawPoint(x + a, y + b,1);
  
-        OLED_DrawPoint(x + b, y + a,1);
-        OLED_DrawPoint(x + b, y - a,1);
-        OLED_DrawPoint(x - b, y - a,1);
-        OLED_DrawPoint(x - b, y + a,1);
+        ABS_OLED_DrawPoint(x + b, y + a,1);
+        ABS_OLED_DrawPoint(x + b, y - a,1);
+        ABS_OLED_DrawPoint(x - b, y - a,1);
+        ABS_OLED_DrawPoint(x - b, y + a,1);
         
         a++;
-        num = (a * a + b * b) - r*r;//���㻭�ĵ���Բ�ĵľ���
+        num = (a * a + b * b) - r*r;
         if(num > 0)
         {
             b--;
@@ -254,35 +301,36 @@ void OLED_DrawCircle(u8 x,u8 y,u8 r)
     }
 }
 
-
-
-//��ָ��λ����ʾһ���ַ�,���������ַ�
-//x:0~127
-//y:0~63
-//size1:ѡ������ 6x8/6x12/8x16/12x24
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowChar
+**描述：在指定位置打印字符
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：chr：需要打印的字符
+**参数4：sizel：打印字符的字体大小。字库有8*6、12*6、16*8、24*12
+**参数5：mode:打印模式，1：正常显示 ；0：反向显示
+*/
+void ABS_OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode)
 {
 	u8 i,m,temp,size2,chr1;
 	u8 x0=x,y0=y;
 	if(size1==8)size2=6;
-	else size2=(size1/8+((size1%8)?1:0))*(size1/2);  //�õ�����һ���ַ���Ӧ������ռ���ֽ���
-	chr1=chr-' ';  //����ƫ�ƺ��ֵ
+	else size2=(size1/8+((size1%8)?1:0))*(size1/2);  
+	chr1=chr-' ';  
 	for(i=0;i<size2;i++)
 	{
 		if(size1==8)
-			  {temp=asc2_0806[chr1][i];} //����0806����
+			  {temp=asc2_0806[chr1][i];} 
 		else if(size1==12)
-        {temp=asc2_1206[chr1][i];} //����1206����
+        {temp=asc2_1206[chr1][i];} //12*06大小
 		else if(size1==16)
-        {temp=asc2_1608[chr1][i];} //����1608����
+        {temp=asc2_1608[chr1][i];} //16*08大小
 		else if(size1==24)
-        {temp=asc2_2412[chr1][i];} //����2412����
+        {temp=asc2_2412[chr1][i];} //24*12大小
 		else return;
 		for(m=0;m<8;m++)
 		{
-			if(temp&0x01)OLED_DrawPoint(x,y,mode);
-			else OLED_DrawPoint(x,y,!mode);
+			if(temp&0x01)ABS_OLED_DrawPoint(x,y,mode);
+			else ABS_OLED_DrawPoint(x,y,!mode);
 			temp>>=1;
 			y++;
 		}
@@ -293,25 +341,31 @@ void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode)
   }
 }
 
-
-//��ʾ�ַ���
-//x,y:�������  
-//size1:�����С 
-//*chr:�ַ�����ʼ��ַ 
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowString
+**描述：在指定位置打印字符串
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：chr：需要打印的字符
+**参数4：sizel：打印字符的字体大小。字库有8*6、12*6、16*8、24*12
+**参数5：mode:打印模式，1：正常显示 ；0：反向显示
+*/
+void ABS_OLED_ShowString(u8 x,u8 y,char *chr,u8 size1,u8 mode)
 {
-	while((*chr>=' ')&&(*chr<='~'))//�ж��Dz��ǷǷ��ַ�!
+	while((*chr>=' ')&&(*chr<='~'))
 	{
-		OLED_ShowChar(x,y,*chr,size1,mode);
+		ABS_OLED_ShowChar(x,y,*chr,size1,mode);
 		if(size1==8)x+=6;
 		else x+=size1/2;
 		chr++;
   }
 }
 
-//m^n
-u32 OLED_Pow(u8 m,u8 n)
+/*函数：ABS_OLED_Pow
+**描述：内部函数，用于求次方
+**参数1：m：底数
+**参数2：n：指数
+*/
+static u32 ABS_OLED_Pow(u8 m,u8 n)
 {
 	u32 result=1;
 	while(n--)
@@ -321,54 +375,61 @@ u32 OLED_Pow(u8 m,u8 n)
 	return result;
 }
 
-//��ʾ����
-//x,y :�������
-//num :Ҫ��ʾ������
-//len :���ֵ�λ��
-//size:�����С
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowNum
+**描述：在指定位置打印数字
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：num：需要打印的数字
+**参数3：len：数字长度，几位数
+**参数5：sizel：打印字符的字体大小。字库有8*6、12*6、16*8、24*12
+**参数6：mode:打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode)
 {
 	u8 t,temp,m=0;
 	if(size1==8)m=2;
 	for(t=0;t<len;t++)
 	{
-		temp=(num/OLED_Pow(10,len-t-1))%10;
+		temp=(num/ABS_OLED_Pow(10,len-t-1))%10;
 			if(temp==0)
 			{
-				OLED_ShowChar(x+(size1/2+m)*t,y,'0',size1,mode);
+				ABS_OLED_ShowChar(x+(size1/2+m)*t,y,'0',size1,mode);
       }
 			else 
 			{
-			  OLED_ShowChar(x+(size1/2+m)*t,y,temp+'0',size1,mode);
+			  ABS_OLED_ShowChar(x+(size1/2+m)*t,y,temp+'0',size1,mode);
 			}
   }
 }
 
-//��ʾ����
-//x,y:�������
-//num:���ֶ�Ӧ�����
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowChinese
+**描述：在指定位置打印中文字符
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：num：在中文字库数组中的索引
+**参数4：sizel：打印字符的字体大小。字库有16*16、32*32、64*64
+**参数6：mode:打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode)
 {
 	u8 m,temp;
 	u8 x0=x,y0=y;
-	u16 i,size3=(size1/8+((size1%8)?1:0))*size1;  //�õ�����һ���ַ���Ӧ������ռ���ֽ���
+	u16 i,size3=(size1/8+((size1%8)?1:0))*size1;  
 	for(i=0;i<size3;i++)
 	{
 		if(size1==16)
-				{temp=Hzk1[num][i];}//����16*16����
+				{temp=Hzk1[num][i];}
 		else if(size1==24)
-				{temp=Hzk2[num][i];}//����24*24����
+				{temp=Hzk2[num][i];}
 		else if(size1==32)       
-				{temp=Hzk3[num][i];}//����32*32����
+				{temp=Hzk3[num][i];}
 		else if(size1==64)
-				{temp=Hzk4[num][i];}//����64*64����
+				{temp=Hzk4[num][i];}
 		else return;
 		for(m=0;m<8;m++)
 		{
-			if(temp&0x01)OLED_DrawPoint(x,y,mode);
-			else OLED_DrawPoint(x,y,!mode);
+			if(temp&0x01)ABS_OLED_DrawPoint(x,y,mode);
+			else ABS_OLED_DrawPoint(x,y,!mode);
 			temp>>=1;
 			y++;
 		}
@@ -379,22 +440,25 @@ void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode)
 	}
 }
 
-//num ��ʾ���ֵĸ���
-//space ÿһ����ʾ�ļ��
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
+/*函数：ABS_OLED_ScrollDisplay
+**描述：滚动显示中文字符
+**参数1：num：显示汉字个数
+**参数2：space：每遍显示的间隔
+**参数3：mode:打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
 {
 	u8 i,n,t=0,m=0,r;
 	while(1)
 	{
 		if(m==0)
 		{
-	    OLED_ShowChinese(128,24,t,16,mode); //д��һ�����ֱ�����ABS_OLED_GRAM[][]������
+	    ABS_OLED_ShowChinese(128,24,t,16,mode); 
 			t++;
 		}
 		if(t==num)
 			{
-				for(r=0;r<16*space;r++)      //��ʾ���
+				for(r=0;r<16*space;r++)
 				 {
 					for(i=1;i<144;i++)
 						{
@@ -409,7 +473,7 @@ void OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
       }
 		m++;
 		if(m==16){m=0;}
-		for(i=1;i<144;i++)   //ʵ������
+		for(i=1;i<144;i++) 
 		{
 			for(n=0;n<8;n++)
 			{
@@ -420,11 +484,16 @@ void OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
 	}
 }
 
-//x,y���������
-//sizex,sizey,ͼƬ����
-//BMP[]��Ҫд���ͼƬ����
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode)
+/*函数：ABS_OLED_ShowPicture
+**描述：显示图片
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：sizex：图片的长
+**参数4：sizey：图片的高
+**参数5：BMP[]:要写入的图片数组
+**参数6：mode：打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode)
 {
 	u16 j=0;
 	u8 i,n,temp,m;
@@ -438,8 +507,8 @@ void OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode)
 				j++;
 				for(m=0;m<8;m++)
 				{
-					if(temp&0x01)OLED_DrawPoint(x,y,mode);
-					else OLED_DrawPoint(x,y,!mode);
+					if(temp&0x01)ABS_OLED_DrawPoint(x,y,mode);
+					else ABS_OLED_DrawPoint(x,y,!mode);
 					temp>>=1;
 					y++;
 				}
@@ -464,7 +533,7 @@ void ABS_OLED_Init(void)
 		#endif
 	
 		#ifdef Enable_ABS_OLED_Delay
-		AbsOledDelay(3);			//延时
+		AbsOledDelay(10);			//延时
 		#endif
 	
 		#ifdef Enable_ABS_OLED_RES
@@ -501,6 +570,23 @@ void ABS_OLED_Init(void)
     AbsOledWriteCMD(0x8D); //--set DC-DC enable
     AbsOledWriteCMD(0x14); //
     AbsOledWriteCMD(CMD_ON_OLED); //--turn on SSD1306 panel
-		OLED_Clear();
+		ABS_OLED_Clear();
+}
+
+
+ABS_OLED_Drive Create_OLED(void){
+	ABS_OLED_Drive drive;
+	drive.Clear = ABS_OLED_Clear;
+	drive.Refresh=ABS_OLED_Refresh;
+	
+	drive.DrawPoint=ABS_OLED_DrawPoint;
+	drive.DrawLine=ABS_OLED_DrawLine;
+	drive.DrawCircle=ABS_OLED_DrawCircle;
+	drive.ShowString=ABS_OLED_ShowString;
+	drive.ShowChinese=ABS_OLED_ShowChinese;
+	drive.ShowNum=ABS_OLED_ShowNum;
+	drive.ShowImage=ABS_OLED_ShowPicture;
+	ABS_OLED_Init();
+	return drive;
 }
 
diff --git a/OLED显示屏/AbsDrive_OLED.h b/OLED显示屏/AbsDrive_OLED.h
index 4cfbcb6..3d41009 100644
--- a/OLED显示屏/AbsDrive_OLED.h
+++ b/OLED显示屏/AbsDrive_OLED.h
@@ -4,19 +4,24 @@
 * 描述：抽象硬件OLED屏幕，只需要实现指定的抽象函数，即可使用
 * 使用：1、在配置区选择配置
 				2、按照配置到AbsDrive_OLED.c实现抽象函数
+*@版本:v0.1.0
 */
 
 #ifndef __ABS_DRIVE_OLED_H
 #define __ABS_DRIVE_OLED_H
-
-//#include "stdlib.h"	
 #include "stdint.h"
-#include "spi.h"
+#include "stdlib.h"
+
+
+/**************************配置区(BEGIN)***************************/
+/*------------你的头文件(BEGIN)----------------*/
+//#include "spi.h"
 #include "gpio.h"
+#include "i2c.h"
 #include "main.h"
+#include "stdio.h"
+/*------------你的头文件(END)------------------*/
 
-
-/**************************配置区***************************/
 /*----1、选择驱动芯片----*/
 /*
 根据你的OLED屏幕选择其中一种
@@ -29,17 +34,18 @@
 /*----2、选择你实现的通信方式----*/
 /*根据你所实现的抽象函数的方式选择：4线SPI、3线SPI、软件IIC、硬件IIC
 */
-#define ABSDrive_4SPI
+//#define ABSDrive_4SPI
 //#define ABSDrive_3SPI
 //#define ABSDrive_SoftIIC
-//#define ABSDrive_HardIIC
+#define ABSDrive_HardIIC
 
 /*----3、设置屏幕相关硬件参数----*/
 #define ABS_OLED_WIDTH					128						//屏幕分辨率宽
 #define ABS_OLED_HEIGHT					64						//屏幕分辨率高
 #define ABS_OLED_PAGE_SIZE			8							//屏幕页结构，页数
-
-
+#if (defined ABSDrive_HardIIC)||(defined ABSDrive_SoftIIC)
+#define ABS_OLED_ADDR						0x1E					//IIC地址
+#endif
 /*----4、是否启动延时函数----*/
 /*不需要延时函数时可以注释掉
 */
@@ -48,26 +54,39 @@
 /*----5、是否启用复位信号引脚----*/
 /*不需要控制复位信号可以注释掉
 */
-#define Enable_ABS_OLED_RES
+//#define Enable_ABS_OLED_RES
+
+/*----5、是否启用DC信号引脚----*/
+/*不需要控制DC信号可以注释掉
+*/
+//#define Enable_ABS_OLED_DC
 
 
-/**************************配置区***************************/
+/**************************配置区(END)***************************/
 
 /*----------------------------------------------分割线(以下内容非开发人员切勿改动)---------------------------------------------------------*/
 
 
 
-#define OLED_CMD  0	
-#define OLED_DATA 1	
-
-
-/*************************数据定义区*****************************/
+/*************************数据定义区(BEGIN)*****************************/
 
 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 
-
+typedef struct _ABS_OLED_Drive{
+	void (*ShowString)(u8 x,u8 y,char *chr,u8 size1,u8 mode);
+	void (*ShowNum)(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode);
+	void (*ShowChinese)(u8 x,u8 y,u8 num,u8 size1,u8 mode);
+	
+	void (*DrawPoint)(u8 x,u8 y,u8 t);
+	void (*DrawLine)(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode);
+	void (*DrawCircle)(u8 x,u8 y,u8 r);
+	void (*ShowImage)(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode);
+	
+	void (*Clear)(void);
+	void (*Refresh)(void);
+}	ABS_OLED_Drive;
 
 /*
 *OLED的状态
@@ -76,9 +95,9 @@ typedef enum _OLED_STATE{
 	ABS_OLED_OK 					=0x00U,			//状态正确
 	ABS_OLED_ERROR				=0x01U,			//状态异常
 } AbsDriveOLED_STATE;
-/*************************数据定义区*****************************/
+/*************************数据定义区(END)*******************************/
 
-/***********************命令区*****************************/
+/***********************命令区(BEGIN)*****************************/
 #if (defined ABS_SSD1306)||(defined ABS_SSD1315)
 //设置类
 //-------基本命令--------------
@@ -97,31 +116,37 @@ typedef enum _OLED_STATE{
 	#define CMD_SetColumnAddr_OLED							0x21	//设置列开始和结束地址
 	
 #endif
-/***********************命令区*****************************/
+/***********************命令区(END)*******************************/
 
 
-/***********************函数区*****************************/
-void OLED_ClearPoint(u8 x,u8 y);
-void OLED_ColorTurn(u8 i);
-void OLED_DisplayTurn(u8 i);
-void I2C_Start(void);
-void I2C_Stop(void);
-void I2C_WaitAck(void);
-void OLED_DisPlay_On(void);
-void OLED_DisPlay_Off(void);
+/***********************函数区(BEGIN)*****************************/
+void ABS_OLED_ClearPoint(u8 x,u8 y);
+void ABS_OLED_ColorTurn(u8 i);
+void ABS_OLED_DisplayTurn(u8 i);
+void ABS_OLED_DisPlay_On(void);
+void ABS_OLED_DisPlay_Off(void);
+AbsDriveOLED_STATE AbsOledWriteCMD(u8 ABScmd);
+AbsDriveOLED_STATE AbsOledWriteDATA(u8 ABSdata);
 void ABS_OLED_Refresh(void);
-void OLED_Clear(void);
-void OLED_DrawPoint(u8 x,u8 y,u8 t);
-void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode);
-void OLED_DrawCircle(u8 x,u8 y,u8 r);
-void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode);
-void OLED_ShowChar6x8(u8 x,u8 y,u8 chr,u8 mode);
-void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 size1,u8 mode);
-void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode);
-void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode);
-void OLED_ScrollDisplay(u8 num,u8 space,u8 mode);
-void OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode);
+void ABS_OLED_Clear(void);
+void ABS_OLED_DrawPoint(u8 x,u8 y,u8 t);
+void ABS_OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode);
+void ABS_OLED_DrawCircle(u8 x,u8 y,u8 r);
+void ABS_OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode);
+void ABS_OLED_ShowString(u8 x,u8 y,char *chr,u8 size1,u8 mode);
+void ABS_OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode);
+void ABS_OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode);
+void ABS_OLED_ScrollDisplay(u8 num,u8 space,u8 mode);
+void ABS_OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode);
 void ABS_OLED_Init(void);
 
+ABS_OLED_Drive Create_OLED(void);													//创建OLED设备
+/***********************函数区(END)*******************************/
+
+
+
+
+
+
 #endif				//__ABS_DRIVE_OLED_H
 
diff --git a/OLED显示屏/README.md b/OLED显示屏/README.md
index e69de29..778b73d 100644
--- a/OLED显示屏/README.md
+++ b/OLED显示屏/README.md
@@ -0,0 +1,7 @@
+## 抽象硬件层OLED屏幕
+
+### 使用
+1. 把AbsDrive_OLED.h、AbsDrive_OLED.c和字库AbsDriveOledFont.h文件复制到工程中
+2. 根据AbsDrive_OLED.h配置区，配置完成
+3. 到AbsDrive_OLED.c抽象实现区，实现对应函数
+
diff --git a/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.c b/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.c
index fc05ec6..da2c87f 100644
--- a/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.c	
+++ b/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.c	
@@ -8,7 +8,7 @@
 #include "AbsDrive_OLED.h"
 #include "AbsDriveOledFont.h"
 
-/**************************抽象实现区************************************/
+/**************************抽象实现区(BEGIN)************************************/
 
 /*抽象函数：写字节
 *要求1：实现一个写入多个字节的函数
@@ -23,6 +23,7 @@ static AbsDriveOLED_STATE AbsOledWriteByte(u8 *_data,u8 _size){
 	return ABS_OLED_OK;
 }
 
+#ifdef Enable_ABS_OLED_RES
 /*抽象函数：复位信号函数
 *要求1：根据电平值设置复位引脚电平
 *参数1：electrical_level:电平值，1、高电平；0、低电平
@@ -33,6 +34,7 @@ static void AbsDriveOLED_RES(u8 electrical_level){
 	else HAL_GPIO_WritePin(oled_res_GPIO_Port,oled_res_Pin,GPIO_PIN_RESET);
 	/********************请实现抽象复位信号函数********************/
 }
+#endif
 
 #ifdef Enable_ABS_OLED_Delay
 /*抽象函数：延时函数
@@ -46,7 +48,7 @@ static void AbsOledDelay(u32 t){
 }
 #endif 
 
-/**************************抽象实现区************************************/
+/**************************抽象实现区(END)**************************************/
 
 
 
@@ -111,7 +113,7 @@ void ABS_OLED_Refresh(void)
 }
 
 
-void OLED_ColorTurn(u8 i)
+void ABS_OLED_ColorTurn(u8 i)
 {
 	if(i==0)
 		{
@@ -124,7 +126,7 @@ void OLED_ColorTurn(u8 i)
 }
 
 
-void OLED_DisplayTurn(u8 i)
+void ABS_OLED_DisplayTurn(u8 i)
 {
 	if(i==0)
 		{
@@ -139,7 +141,7 @@ void OLED_DisplayTurn(u8 i)
 }
 
 
-void OLED_DisPlay_On(void)
+void ABS_OLED_DisPlay_On(void)
 {
 	AbsOledWriteCMD(0x8D);
 	AbsOledWriteCMD(0x14);
@@ -147,7 +149,7 @@ void OLED_DisPlay_On(void)
 }
 
 
-void OLED_DisPlay_Off(void)
+void ABS_OLED_DisPlay_Off(void)
 {
 	AbsOledWriteCMD(0x8D);
 	AbsOledWriteCMD(0x10);
@@ -156,8 +158,10 @@ void OLED_DisPlay_Off(void)
 
 
 
-
-void OLED_Clear(void)
+/*函数：ABS_OLED_Clear
+**描述：清空屏幕显存并刷新屏幕
+*/
+void ABS_OLED_Clear(void)
 {
 	u8 i,n;
 	for(i=0;i<8;i++)
@@ -170,17 +174,20 @@ void OLED_Clear(void)
 	ABS_OLED_Refresh();
 }
 
-//���� 
-//x:0~127
-//y:0~63
-//t:1 ��� 0,���	
-void OLED_DrawPoint(u8 x,u8 y,u8 t)
+
+/*函数：ABS_OLED_DrawPoint
+**描述：按照坐标绘制一个点
+**参数1：x：x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y：y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：mode:绘制模式，1：填充；0：清空 
+*/
+void ABS_OLED_DrawPoint(u8 x,u8 y,u8 mode)
 {
 	u8 i,m,n;
 	i=y/8;
 	m=y%8;
 	n=1<<m;
-	if(t){ABS_OLED_GRAM[x][i]|=n;}
+	if(mode){ABS_OLED_GRAM[x][i]|=n;}
 	else
 	{
 		ABS_OLED_GRAM[x][i]=~ABS_OLED_GRAM[x][i];
@@ -189,29 +196,34 @@ void OLED_DrawPoint(u8 x,u8 y,u8 t)
 	}
 }
 
-//����
-//x1,y1:�������
-//x2,y2:��������
-void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode)
+/*函数：ABS_OLED_DrawLine
+**描述：按照起始坐标和结束坐标绘制直线
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：x2：结束x坐标	取值返回小于ABS_OLED_WIDTH
+**参数4：y2：结束y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数5：mode:绘制模式，1：填充；0：清空 
+*/
+void ABS_OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode)
 {
 	u16 t; 
 	int xerr=0,yerr=0,delta_x,delta_y,distance;
 	int incx,incy,uRow,uCol;
-	delta_x=x2-x1; //������������ 
+	delta_x=x2-x1; 
 	delta_y=y2-y1;
-	uRow=x1;//�����������
+	uRow=x1;
 	uCol=y1;
-	if(delta_x>0)incx=1; //���õ������� 
-	else if (delta_x==0)incx=0;//��ֱ�� 
+	if(delta_x>0)incx=1; 
+	else if (delta_x==0)incx=0;
 	else {incx=-1;delta_x=-delta_x;}
 	if(delta_y>0)incy=1;
-	else if (delta_y==0)incy=0;//ˮƽ�� 
+	else if (delta_y==0)incy=0;
 	else {incy=-1;delta_y=-delta_x;}
-	if(delta_x>delta_y)distance=delta_x; //ѡȡ�������������� 
+	if(delta_x>delta_y)distance=delta_x;
 	else distance=delta_y;
 	for(t=0;t<distance+1;t++)
 	{
-		OLED_DrawPoint(uRow,uCol,mode);//����
+		ABS_OLED_DrawPoint(uRow,uCol,mode);
 		xerr+=delta_x;
 		yerr+=delta_y;
 		if(xerr>distance)
@@ -226,27 +238,31 @@ void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode)
 		}
 	}
 }
-//x,y:Բ������
-//r:Բ�İ뾶
-void OLED_DrawCircle(u8 x,u8 y,u8 r)
+/*函数：ABS_OLED_DrawCircle
+**描述：按照中心坐标绘制半径r的圆
+**参数1：x：中心x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y：中心y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：mode:绘制模式，1：填充；0：清空 
+*/
+void ABS_OLED_DrawCircle(u8 x,u8 y,u8 r)
 {
 	int a, b,num;
     a = 0;
     b = r;
     while(2 * b * b >= r * r)      
     {
-        OLED_DrawPoint(x + a, y - b,1);
-        OLED_DrawPoint(x - a, y - b,1);
-        OLED_DrawPoint(x - a, y + b,1);
-        OLED_DrawPoint(x + a, y + b,1);
+        ABS_OLED_DrawPoint(x + a, y - b,1);
+        ABS_OLED_DrawPoint(x - a, y - b,1);
+        ABS_OLED_DrawPoint(x - a, y + b,1);
+        ABS_OLED_DrawPoint(x + a, y + b,1);
  
-        OLED_DrawPoint(x + b, y + a,1);
-        OLED_DrawPoint(x + b, y - a,1);
-        OLED_DrawPoint(x - b, y - a,1);
-        OLED_DrawPoint(x - b, y + a,1);
+        ABS_OLED_DrawPoint(x + b, y + a,1);
+        ABS_OLED_DrawPoint(x + b, y - a,1);
+        ABS_OLED_DrawPoint(x - b, y - a,1);
+        ABS_OLED_DrawPoint(x - b, y + a,1);
         
         a++;
-        num = (a * a + b * b) - r*r;//���㻭�ĵ���Բ�ĵľ���
+        num = (a * a + b * b) - r*r;
         if(num > 0)
         {
             b--;
@@ -255,35 +271,36 @@ void OLED_DrawCircle(u8 x,u8 y,u8 r)
     }
 }
 
-
-
-//��ָ��λ����ʾһ���ַ�,���������ַ�
-//x:0~127
-//y:0~63
-//size1:ѡ������ 6x8/6x12/8x16/12x24
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowChar
+**描述：在指定位置打印字符
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：chr：需要打印的字符
+**参数4：sizel：打印字符的字体大小。字库有8*6、12*6、16*8、24*12
+**参数5：mode:打印模式，1：正常显示 ；0：反向显示
+*/
+void ABS_OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode)
 {
 	u8 i,m,temp,size2,chr1;
 	u8 x0=x,y0=y;
 	if(size1==8)size2=6;
-	else size2=(size1/8+((size1%8)?1:0))*(size1/2);  //�õ�����һ���ַ���Ӧ������ռ���ֽ���
-	chr1=chr-' ';  //����ƫ�ƺ��ֵ
+	else size2=(size1/8+((size1%8)?1:0))*(size1/2);  
+	chr1=chr-' ';  
 	for(i=0;i<size2;i++)
 	{
 		if(size1==8)
-			  {temp=asc2_0806[chr1][i];} //����0806����
+			  {temp=asc2_0806[chr1][i];} 
 		else if(size1==12)
-        {temp=asc2_1206[chr1][i];} //����1206����
+        {temp=asc2_1206[chr1][i];} //12*06大小
 		else if(size1==16)
-        {temp=asc2_1608[chr1][i];} //����1608����
+        {temp=asc2_1608[chr1][i];} //16*08大小
 		else if(size1==24)
-        {temp=asc2_2412[chr1][i];} //����2412����
+        {temp=asc2_2412[chr1][i];} //24*12大小
 		else return;
 		for(m=0;m<8;m++)
 		{
-			if(temp&0x01)OLED_DrawPoint(x,y,mode);
-			else OLED_DrawPoint(x,y,!mode);
+			if(temp&0x01)ABS_OLED_DrawPoint(x,y,mode);
+			else ABS_OLED_DrawPoint(x,y,!mode);
 			temp>>=1;
 			y++;
 		}
@@ -294,25 +311,31 @@ void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode)
   }
 }
 
-
-//��ʾ�ַ���
-//x,y:�������  
-//size1:�����С 
-//*chr:�ַ�����ʼ��ַ 
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowString
+**描述：在指定位置打印字符串
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：chr：需要打印的字符
+**参数4：sizel：打印字符的字体大小。字库有8*6、12*6、16*8、24*12
+**参数5：mode:打印模式，1：正常显示 ；0：反向显示
+*/
+void ABS_OLED_ShowString(u8 x,u8 y,char *chr,u8 size1,u8 mode)
 {
-	while((*chr>=' ')&&(*chr<='~'))//�ж��Dz��ǷǷ��ַ�!
+	while((*chr>=' ')&&(*chr<='~'))
 	{
-		OLED_ShowChar(x,y,*chr,size1,mode);
+		ABS_OLED_ShowChar(x,y,*chr,size1,mode);
 		if(size1==8)x+=6;
 		else x+=size1/2;
 		chr++;
   }
 }
 
-//m^n
-u32 OLED_Pow(u8 m,u8 n)
+/*函数：ABS_OLED_Pow
+**描述：内部函数，用于求次方
+**参数1：m：底数
+**参数2：n：指数
+*/
+static u32 ABS_OLED_Pow(u8 m,u8 n)
 {
 	u32 result=1;
 	while(n--)
@@ -322,54 +345,61 @@ u32 OLED_Pow(u8 m,u8 n)
 	return result;
 }
 
-//��ʾ����
-//x,y :�������
-//num :Ҫ��ʾ������
-//len :���ֵ�λ��
-//size:�����С
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowNum
+**描述：在指定位置打印数字
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：num：需要打印的数字
+**参数3：len：数字长度，几位数
+**参数5：sizel：打印字符的字体大小。字库有8*6、12*6、16*8、24*12
+**参数6：mode:打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode)
 {
 	u8 t,temp,m=0;
 	if(size1==8)m=2;
 	for(t=0;t<len;t++)
 	{
-		temp=(num/OLED_Pow(10,len-t-1))%10;
+		temp=(num/ABS_OLED_Pow(10,len-t-1))%10;
 			if(temp==0)
 			{
-				OLED_ShowChar(x+(size1/2+m)*t,y,'0',size1,mode);
+				ABS_OLED_ShowChar(x+(size1/2+m)*t,y,'0',size1,mode);
       }
 			else 
 			{
-			  OLED_ShowChar(x+(size1/2+m)*t,y,temp+'0',size1,mode);
+			  ABS_OLED_ShowChar(x+(size1/2+m)*t,y,temp+'0',size1,mode);
 			}
   }
 }
 
-//��ʾ����
-//x,y:�������
-//num:���ֶ�Ӧ�����
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode)
+/*函数：ABS_OLED_ShowChinese
+**描述：在指定位置打印中文字符
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：num：在中文字库数组中的索引
+**参数4：sizel：打印字符的字体大小。字库有16*16、32*32、64*64
+**参数6：mode:打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode)
 {
 	u8 m,temp;
 	u8 x0=x,y0=y;
-	u16 i,size3=(size1/8+((size1%8)?1:0))*size1;  //�õ�����һ���ַ���Ӧ������ռ���ֽ���
+	u16 i,size3=(size1/8+((size1%8)?1:0))*size1;  
 	for(i=0;i<size3;i++)
 	{
 		if(size1==16)
-				{temp=Hzk1[num][i];}//����16*16����
+				{temp=Hzk1[num][i];}
 		else if(size1==24)
-				{temp=Hzk2[num][i];}//����24*24����
+				{temp=Hzk2[num][i];}
 		else if(size1==32)       
-				{temp=Hzk3[num][i];}//����32*32����
+				{temp=Hzk3[num][i];}
 		else if(size1==64)
-				{temp=Hzk4[num][i];}//����64*64����
+				{temp=Hzk4[num][i];}
 		else return;
 		for(m=0;m<8;m++)
 		{
-			if(temp&0x01)OLED_DrawPoint(x,y,mode);
-			else OLED_DrawPoint(x,y,!mode);
+			if(temp&0x01)ABS_OLED_DrawPoint(x,y,mode);
+			else ABS_OLED_DrawPoint(x,y,!mode);
 			temp>>=1;
 			y++;
 		}
@@ -380,22 +410,25 @@ void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode)
 	}
 }
 
-//num ��ʾ���ֵĸ���
-//space ÿһ����ʾ�ļ��
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
+/*函数：ABS_OLED_ScrollDisplay
+**描述：滚动显示中文字符
+**参数1：num：显示汉字个数
+**参数2：space：每遍显示的间隔
+**参数3：mode:打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
 {
 	u8 i,n,t=0,m=0,r;
 	while(1)
 	{
 		if(m==0)
 		{
-	    OLED_ShowChinese(128,24,t,16,mode); //д��һ�����ֱ�����ABS_OLED_GRAM[][]������
+	    ABS_OLED_ShowChinese(128,24,t,16,mode); 
 			t++;
 		}
 		if(t==num)
 			{
-				for(r=0;r<16*space;r++)      //��ʾ���
+				for(r=0;r<16*space;r++)
 				 {
 					for(i=1;i<144;i++)
 						{
@@ -410,7 +443,7 @@ void OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
       }
 		m++;
 		if(m==16){m=0;}
-		for(i=1;i<144;i++)   //ʵ������
+		for(i=1;i<144;i++) 
 		{
 			for(n=0;n<8;n++)
 			{
@@ -421,11 +454,16 @@ void OLED_ScrollDisplay(u8 num,u8 space,u8 mode)
 	}
 }
 
-//x,y���������
-//sizex,sizey,ͼƬ����
-//BMP[]��Ҫд���ͼƬ����
-//mode:0,��ɫ��ʾ;1,������ʾ
-void OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode)
+/*函数：ABS_OLED_ShowPicture
+**描述：显示图片
+**参数1：x1：起始x坐标	取值返回小于ABS_OLED_WIDTH
+**参数2：y1：起始y坐标	取值返回小于ABS_OLED_HEIGHT
+**参数3：sizex：图片的长
+**参数4：sizey：图片的高
+**参数5：BMP[]:要写入的图片数组
+**参数6：mode：打印模式，1：正常显示 ；0：反向显示
+**/
+void ABS_OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode)
 {
 	u16 j=0;
 	u8 i,n,temp,m;
@@ -439,8 +477,8 @@ void OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode)
 				j++;
 				for(m=0;m<8;m++)
 				{
-					if(temp&0x01)OLED_DrawPoint(x,y,mode);
-					else OLED_DrawPoint(x,y,!mode);
+					if(temp&0x01)ABS_OLED_DrawPoint(x,y,mode);
+					else ABS_OLED_DrawPoint(x,y,!mode);
 					temp>>=1;
 					y++;
 				}
@@ -502,6 +540,23 @@ void ABS_OLED_Init(void)
     AbsOledWriteCMD(0x8D); //--set DC-DC enable
     AbsOledWriteCMD(0x14); //
     AbsOledWriteCMD(CMD_ON_OLED); //--turn on SSD1306 panel
-		OLED_Clear();
+		ABS_OLED_Clear();
+}
+
+
+ABS_OLED_Drive Create_OLED(void){
+	ABS_OLED_Drive drive;
+	drive.Clear = ABS_OLED_Clear;
+	drive.Refresh=ABS_OLED_Refresh;
+	
+	drive.DrawPoint=ABS_OLED_DrawPoint;
+	drive.DrawLine=ABS_OLED_DrawLine;
+	drive.DrawCircle=ABS_OLED_DrawCircle;
+	drive.ShowString=ABS_OLED_ShowString;
+	drive.ShowChinese=ABS_OLED_ShowChinese;
+	drive.ShowNum=ABS_OLED_ShowNum;
+	drive.ShowImage=ABS_OLED_ShowPicture;
+	ABS_OLED_Init();
+	return drive;
 }
 
diff --git a/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.h b/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.h
index 4cfbcb6..8b9b618 100644
--- a/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.h	
+++ b/OLED显示屏/实现示例/STM32 HAL库/AbsDrive_OLED.h	
@@ -8,15 +8,17 @@
 
 #ifndef __ABS_DRIVE_OLED_H
 #define __ABS_DRIVE_OLED_H
-
-//#include "stdlib.h"	
 #include "stdint.h"
+#include "stdlib.h"
+
+
+/**************************配置区(BEGIN)***************************/
+/*------------你的头文件(BEGIN)----------------*/
 #include "spi.h"
 #include "gpio.h"
 #include "main.h"
+/*------------你的头文件(END)------------------*/
 
-
-/**************************配置区***************************/
 /*----1、选择驱动芯片----*/
 /*
 根据你的OLED屏幕选择其中一种
@@ -51,23 +53,31 @@
 #define Enable_ABS_OLED_RES
 
 
-/**************************配置区***************************/
+/**************************配置区(END)***************************/
 
 /*----------------------------------------------分割线(以下内容非开发人员切勿改动)---------------------------------------------------------*/
 
 
 
-#define OLED_CMD  0	
-#define OLED_DATA 1	
-
-
-/*************************数据定义区*****************************/
+/*************************数据定义区(BEGIN)*****************************/
 
 #define u8 uint8_t
 #define u16 uint16_t
 #define u32 uint32_t
 
-
+typedef struct _ABS_OLED_Drive{
+	void (*ShowString)(u8 x,u8 y,char *chr,u8 size1,u8 mode);
+	void (*ShowNum)(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode);
+	void (*ShowChinese)(u8 x,u8 y,u8 num,u8 size1,u8 mode);
+	
+	void (*DrawPoint)(u8 x,u8 y,u8 t);
+	void (*DrawLine)(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode);
+	void (*DrawCircle)(u8 x,u8 y,u8 r);
+	void (*ShowImage)(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode);
+	
+	void (*Clear)(void);
+	void (*Refresh)(void);
+}	ABS_OLED_Drive;
 
 /*
 *OLED的状态
@@ -76,9 +86,9 @@ typedef enum _OLED_STATE{
 	ABS_OLED_OK 					=0x00U,			//状态正确
 	ABS_OLED_ERROR				=0x01U,			//状态异常
 } AbsDriveOLED_STATE;
-/*************************数据定义区*****************************/
+/*************************数据定义区(END)*******************************/
 
-/***********************命令区*****************************/
+/***********************命令区(BEGIN)*****************************/
 #if (defined ABS_SSD1306)||(defined ABS_SSD1315)
 //设置类
 //-------基本命令--------------
@@ -97,31 +107,35 @@ typedef enum _OLED_STATE{
 	#define CMD_SetColumnAddr_OLED							0x21	//设置列开始和结束地址
 	
 #endif
-/***********************命令区*****************************/
+/***********************命令区(END)*******************************/
 
 
-/***********************函数区*****************************/
-void OLED_ClearPoint(u8 x,u8 y);
-void OLED_ColorTurn(u8 i);
-void OLED_DisplayTurn(u8 i);
-void I2C_Start(void);
-void I2C_Stop(void);
-void I2C_WaitAck(void);
-void OLED_DisPlay_On(void);
-void OLED_DisPlay_Off(void);
+/***********************函数区(BEGIN)*****************************/
+void ABS_OLED_ClearPoint(u8 x,u8 y);
+void ABS_OLED_ColorTurn(u8 i);
+void ABS_OLED_DisplayTurn(u8 i);
+void ABS_OLED_DisPlay_On(void);
+void ABS_OLED_DisPlay_Off(void);
 void ABS_OLED_Refresh(void);
-void OLED_Clear(void);
-void OLED_DrawPoint(u8 x,u8 y,u8 t);
-void OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode);
-void OLED_DrawCircle(u8 x,u8 y,u8 r);
-void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode);
-void OLED_ShowChar6x8(u8 x,u8 y,u8 chr,u8 mode);
-void OLED_ShowString(u8 x,u8 y,u8 *chr,u8 size1,u8 mode);
-void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode);
-void OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode);
-void OLED_ScrollDisplay(u8 num,u8 space,u8 mode);
-void OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode);
+void ABS_OLED_Clear(void);
+void ABS_OLED_DrawPoint(u8 x,u8 y,u8 t);
+void ABS_OLED_DrawLine(u8 x1,u8 y1,u8 x2,u8 y2,u8 mode);
+void ABS_OLED_DrawCircle(u8 x,u8 y,u8 r);
+void ABS_OLED_ShowChar(u8 x,u8 y,u8 chr,u8 size1,u8 mode);
+void ABS_OLED_ShowString(u8 x,u8 y,char *chr,u8 size1,u8 mode);
+void ABS_OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size1,u8 mode);
+void ABS_OLED_ShowChinese(u8 x,u8 y,u8 num,u8 size1,u8 mode);
+void ABS_OLED_ScrollDisplay(u8 num,u8 space,u8 mode);
+void ABS_OLED_ShowPicture(u8 x,u8 y,u8 sizex,u8 sizey,u8 BMP[],u8 mode);
 void ABS_OLED_Init(void);
 
+ABS_OLED_Drive Create_OLED(void);													//创建OLED设备
+/***********************函数区(END)*******************************/
+
+
+
+
+
+
 #endif				//__ABS_DRIVE_OLED_H
 
diff --git a/README.md b/README.md
index e69de29..34a9693 100644
--- a/README.md
+++ b/README.md
@@ -0,0 +1,23 @@
+# 简介
+## 开发的来龙去脉
+每次做项目的时候，都会遇到一些重复的代码，这些代码都是相似的，但是又不能直接复用，因为它们之间存在一些差异。
+
+就像以抽象的思想去实现绝大部分外设的驱动
+
+只需要配置一下参数和实现一下底层接口就可以直接使用
+
+## 开发思路
+1. 定义一个配置区间，在这个区间内，可以配置一些参数，这些参数可以适配不同的硬件
+2. 定义一个抽象实现区间，在这个区间内，可以实现一些底层接口，这些接口可以适配不同的硬件
+
+
+## 开发说明
+首先欢迎大家一起来参与开发，只要遵守以下开发规范，就可以提交代码，共同完善这个项目
+
+### 开发规范
+1. 文件夹的命名规范：以硬件类型的不同来建立文件夹，比如：OLED、LCD、温度传感器等等
+2. 文件的命名规范：开头为”ABS_硬件“或者“ABSDrive_硬件”开头，比如：ABS_OLED、等等
+3. 函数命名规范：以”ABS_“或者”ABSDrive_“开头，比如：ABS_Init、ABSDrive_Init等等
+4. 注释规范：需要明显区分**配置区**以及**开发区**
+5. 必须编写移植教程以及移植示例，并且提供相应的示例代码在对应示例文件夹供参考
+6. 供移植的代码请保持抽象实现区的整洁(删除原先的示例代码)
\ No newline at end of file
diff --git a/数据结构/队列/main.c b/数据结构/队列/main.c
new file mode 100644
index 0000000..a7a44a5
--- /dev/null
+++ b/数据结构/队列/main.c
@@ -0,0 +1,36 @@
+#include "queue.h"
+#include <stdio.h>
+
+int main(){
+
+    int a[10];                      //创建队列容器
+    SqQuecu a_quecu;                //初始化队列
+    InitQuecu(&a_quecu,10,sizeof(int),(void*)a);
+    //出队进队测试
+    int *tmep;//临时存储进对的返回值
+    for (size_t i = 0; i < 50; i++)
+    {
+        tmep = (int*)enQueue(&a_quecu);
+        if(tmep!=NULL){                         //返回值为空指针则对满
+            *tmep=i;
+        }
+        else{
+            printf("出队元素:%d\n",*(int*)deQueue(&a_quecu));
+            *(int*)enQueue(&a_quecu)=i;                             //出队后重新进队
+        }
+        for(int i=0;i<10;i++)
+        printf("%d\n",a[i]);
+
+        printf("-------------------------\n");
+
+    }
+
+    //连续退队测试
+    for(int i=0;i<5;i++){
+        printf("出队元素:%d\n",*(int*)deQueue(&a_quecu));
+        printf("当前队列长度:%d\n",a_quecu.size);
+    }
+
+    return 0;
+
+}
\ No newline at end of file
diff --git a/数据结构/队列/queue.c b/数据结构/队列/queue.c
new file mode 100644
index 0000000..cf1b147
--- /dev/null
+++ b/数据结构/队列/queue.c
@@ -0,0 +1,82 @@
+/*
+*@文件:queue.c
+*@作者:‘你遇了我’
+*@time:2022/11/13
+*@联系:QQ:321640253
+*@版本:V1.2
+*@描述:数组泛型队列。队列管理和容器空间分离
+使用案例:
+
+*/
+//
+// Created by 86186 on 2022/11/13.
+//
+
+#include "queue.h"
+
+/*
+ * @简介：初始化一个队列
+ * @参数：
+ *      *Q：队列指针
+ *      Maxsize：队列容器数组的长度
+ *      NodeSize:队列容器数组每个元素的空间
+ *      *container：容器数组指针
+ * @返回值：无
+ * */
+void InitQuecu(SqQuecu *Q,uint16_t Maxsize,uint16_t NodeSize,void *container){ 
+    Q->front=Q->rear=-1;
+    Q->size=0;
+    Q->Maxsize=Maxsize;
+    Q->NodeSize=NodeSize;
+    Q->container=container;
+}
+
+
+/*
+ * @简介：判断队列为空
+ * @参数：队列指针
+ * @返回值：布尔值
+ * */
+bool QueueEmpty(SqQuecu *Q){
+    if(Q->size==0)return true;
+    else return false;
+}
+
+/*
+ * @简介：判断队列为满
+ * @参数：队列指针
+ * @返回值：布尔值
+ * */
+bool QueueFull(SqQuecu *Q){
+    if(Q->size==Q->Maxsize)return true;
+    else return false;
+}
+
+/*
+ * @简介：进队
+ * @参数：队列指针
+ *      进队元素
+ * @返回值：可进队空间的地址
+ * */
+void *enQueue(SqQuecu *Q){
+    if(QueueFull(Q))return NULL;
+    if(Q->rear==Q->Maxsize-1)Q->rear=-1;
+    Q->rear++;
+    Q->size++;
+    return Q->container+Q->rear*Q->NodeSize;
+}
+
+/*
+ * @简介：出队
+ * @参数：队列指针
+ * @返回值：出队元素的地址指针
+ * */
+void *deQueue(SqQuecu *Q){
+    if(QueueEmpty(Q))return NULL;
+    if(Q->front==Q->Maxsize-1)Q->front=-1;
+    Q->front++;
+    Q->size--;
+	return Q->container+Q->front*Q->NodeSize;
+}
+
+
diff --git a/数据结构/队列/queue.h b/数据结构/队列/queue.h
new file mode 100644
index 0000000..5362988
--- /dev/null
+++ b/数据结构/队列/queue.h
@@ -0,0 +1,62 @@
+/*
+*@文件:queue.h
+*@作者:‘你遇了我’
+*@time:2022/11/13
+*@联系:QQ:321640253
+*@版本:V1.2
+*@描述:数组泛型队列,队列管理和容器空间分离
+使用案例
+    int a[10];                      //创建队列容器
+    SqQuecu a_quecu;                //初始化队列
+    InitQuecu(&a_quecu,10,sizeof(int),(void*)a);
+
+    //出队进队测试
+    int *tmep;//临时存储进对的返回值
+    for (size_t i = 0; i < 50; i++)
+    {
+        tmep = (int*)enQueue(&a_quecu);
+        if(tmep!=NULL){                         //返回值为空指针则对满
+            *tmep=i;
+        }
+        else{
+            printf("出队元素:%d\n",*(int*)deQueue(&a_quecu));
+            *(int*)enQueue(&a_quecu)=i;                             //出队后重新进队
+        }
+        for(int i=0;i<10;i++)
+        printf("%d\n",a[i]);
+
+        printf("-------------------------\n");
+
+    }
+
+    //连续退队测试
+    for(int i=0;i<5;i++){
+        printf("出队元素:%d\n",*(int*)deQueue(&a_quecu));
+        printf("当前队列长度:%d\n",a_quecu.size);
+    }
+*/
+
+#ifndef LIST_QUEUE_H
+#define LIST_QUEUE_H
+
+#include "stdint.h"
+#include "stdbool.h"
+#include "stdlib.h"
+
+
+typedef struct{
+    uint16_t Maxsize;           //数组最大长度
+    uint16_t NodeSize;          //数组元素的空间大小
+    void *container;            //容器的指针
+    int front,rear;             //尾和头
+    uint16_t size;              //队列长度
+} SqQuecu;
+
+void InitQuecu(SqQuecu *Q,uint16_t Maxsize,uint16_t NodeSize,void *container);
+void *enQueue(SqQuecu *Q);
+void *deQueue(SqQuecu *Q);
+bool QueueEmpty(SqQuecu *Q);
+bool QueueFull(SqQuecu *Q);
+
+
+#endif //LIST_QUEUE_H
diff --git a/通讯协议/软件IIC/AbsSoftIIC.c b/通讯协议/软件IIC/AbsSoftIIC.c
new file mode 100644
index 0000000..e087f61
--- /dev/null
+++ b/通讯协议/软件IIC/AbsSoftIIC.c
@@ -0,0 +1,244 @@
+/*
+@文件：AbsSoftIIC.c
+@作者：你遇了我
+@联系：321640253@qq.com
+@描述：软件IIC
+@版本：v0.1.2
+*/
+#include "AbsSoftIIC.h"
+
+#if(ABS_SOFT_IIC_ON)
+
+/**************************抽象实现区(BEGIN)********************************/
+/*
+实现SDA引脚改变为输入模式
+*/
+void ABS_IIC_SDA_MODE_INPUT(void){
+	GPIO_InitTypeDef GPIO_InitStruct = {0};
+	GPIO_InitStruct.Pin = GPIO_PIN_8;
+	GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+	GPIO_InitStruct.Pull = GPIO_NOPULL;
+	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+}
+
+/*
+实现SDA引脚改变为输出模式
+*/
+void ABS_IIC_SDA_MODE_OUTPUT(void){
+	GPIO_InitTypeDef GPIO_InitStruct = {0};
+	
+	GPIO_InitStruct.Pin = GPIO_PIN_8;
+	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+	GPIO_InitStruct.Pull = GPIO_NOPULL;
+	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+	HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+}
+
+
+/**************************抽象实现区(END)**********************************/
+
+
+
+
+
+/*简易延时*/
+static void ABS_IIC_delay(uint16_t T){
+	while(T--);
+}
+
+/*起始信号*/
+void ABS_I2C_Start(void)
+{
+	ABS_IIC_SDA_Set();
+	ABS_IIC_SCL_Set();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SDA_Reset();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+}
+
+/*结束信号*/
+void ABS_I2C_Stop(void)
+{
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_SDA_Reset();
+	ABS_IIC_SCL_Set();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SDA_Set();
+}
+
+/*等待应答信号*/
+ABS_SOFT_IIC_STATE ABS_I2C_WaitAck(void) 
+{
+	ABS_IIC_SDA_Set();
+	uint16_t timeout = 0;
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+ 	ABS_IIC_SDA_MODE_INPUT();
+	ABS_IIC_SCL_Set();
+	while(ABS_IIC_SDA_READ()){
+		ABS_IIC_delay(1);
+		timeout++;
+		if(timeout>ABS_IIC_Wait_OUTTime){
+			ABS_IIC_SCL_Reset();
+			ABS_IIC_SDA_MODE_OUTPUT();
+			return ABS_SOFT_IIC_TIMEOUT;
+		}
+	}
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_SDA_MODE_OUTPUT();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	return ABS_SOFT_IIC_SUCCESS;
+}
+
+void ABS_I2C_Ack(void)
+{
+	ABS_IIC_SDA_MODE_OUTPUT();
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_SDA_Reset();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SCL_Set();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+}
+void ABS_I2C_NAck(void)
+{
+	ABS_IIC_SDA_MODE_OUTPUT();
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_SDA_Set();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SCL_Set();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+}
+
+/*发送一个字节*/
+static void ABS_IIC_Send_Byte(uint8_t dat)
+{
+	uint8_t i;
+	for(i=0;i<8;i++)
+	{
+		if(dat&0x80)
+		{
+			ABS_IIC_SDA_Set();
+    }
+		else
+		{
+			ABS_IIC_SDA_Reset();
+    }
+		ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+		ABS_IIC_SCL_Set();
+		ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+		ABS_IIC_SCL_Reset();
+		dat<<=1;
+  }
+  ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+}
+
+void ABS_I2C_Read_Byte(uint8_t address,uint8_t *dat)
+{
+	uint8_t i;
+	ABS_IIC_SCL_Reset();
+	ABS_IIC_SDA_Reset();
+	ABS_IIC_SDA_MODE_INPUT();
+	ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	for(i=0;i<8;i++)
+	{
+		ABS_IIC_SCL_Set();
+		ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+		if(ABS_IIC_SDA_READ())
+		{
+			*dat|=(0x1<<(7-i));
+		}
+		else
+		{
+			*dat&=~(0x1<<(7-i));
+		}
+		ABS_IIC_SCL_Reset();
+		ABS_IIC_delay(ABS_IIC_DELAY_TIME);
+	}
+}
+
+ABS_SOFT_IIC_STATE ABS_I2C_WR_Byte(uint8_t address,uint8_t dat){
+	ABS_IIC_SCL_Set();
+	ABS_IIC_SDA_Set();
+	ABS_I2C_Start();
+	ABS_IIC_Send_Byte(address);
+	if(ABS_I2C_WaitAck()==ABS_SOFT_IIC_SUCCESS);
+	else {
+		ABS_I2C_Stop();
+		return ABS_SOFT_IIC_ERROR;
+	}
+
+	ABS_IIC_Send_Byte(dat);
+	ABS_I2C_WaitAck();
+	ABS_I2C_Stop();
+	return ABS_SOFT_IIC_SUCCESS;
+}
+/*
+*@函数:ABS_I2C_WR_Bytes
+*@功能:向指定的器件地址写入num个字节数据
+*@参数:	address:器件地址
+		*dat:需要写入数据的指针
+		num:数据的长度(不包括器件地址)
+*/
+ABS_SOFT_IIC_STATE ABS_I2C_WR_Bytes(uint8_t address,uint8_t *dat,uint8_t num){
+	ABS_IIC_SCL_Set();
+	ABS_IIC_SDA_Set();
+	ABS_I2C_Start();
+	ABS_IIC_Send_Byte(address);
+	if(ABS_I2C_WaitAck()==ABS_SOFT_IIC_SUCCESS);
+	else {
+		ABS_I2C_Stop();
+		return ABS_SOFT_IIC_ERROR;
+	}
+	while(num--)
+	{
+		ABS_IIC_Send_Byte(*dat);
+		ABS_I2C_WaitAck();
+		dat++;
+	}
+	ABS_I2C_Stop();
+	return ABS_SOFT_IIC_SUCCESS;
+}
+
+ABS_SOFT_IIC_STATE ABS_I2C_RD_Byte(uint8_t address,uint8_t *dat){	
+	ABS_IIC_SCL_Set();
+	ABS_IIC_SDA_Set();
+	ABS_I2C_Start();
+	ABS_IIC_Send_Byte(address);
+	if(ABS_I2C_WaitAck()==ABS_SOFT_IIC_SUCCESS);
+	else {
+		ABS_I2C_Stop();
+		return ABS_SOFT_IIC_ERROR;
+	}
+	ABS_I2C_Read_Byte(address,dat);
+	ABS_I2C_Stop();
+	return ABS_SOFT_IIC_SUCCESS;
+}
+
+ABS_SOFT_IIC_STATE ABS_I2C_RD_Bytes(uint8_t address,uint8_t *dat,uint8_t num){	
+	ABS_IIC_SCL_Set();
+	ABS_IIC_SDA_Set();
+	ABS_I2C_Start();
+	ABS_IIC_Send_Byte(address);
+	if(ABS_I2C_WaitAck()==ABS_SOFT_IIC_SUCCESS);
+	else {
+		ABS_I2C_Stop();
+		return ABS_SOFT_IIC_ERROR;
+	}
+	while(num--)
+	{
+		ABS_I2C_Read_Byte(address,dat);	
+		if(num==0)ABS_I2C_NAck();
+		else ABS_I2C_Ack();
+		dat++;
+	}
+	ABS_I2C_Stop();
+	return ABS_SOFT_IIC_SUCCESS;
+}
+
+#endif
\ No newline at end of file
diff --git a/通讯协议/软件IIC/AbsSoftIIC.h b/通讯协议/软件IIC/AbsSoftIIC.h
new file mode 100644
index 0000000..4fcbbf6
--- /dev/null
+++ b/通讯协议/软件IIC/AbsSoftIIC.h
@@ -0,0 +1,52 @@
+/*
+@文件：AbsSoftIIC.h
+@作者：你遇了我
+@联系：321640253@qq.com
+@描述：软件IIC,请在配置区按照自己的情况改动
+@版本：v0.1.2
+*/
+
+#ifndef _ABS_SOFT_I2C_H_
+#define _ABS_SOFT_I2C_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+#define ABS_SOFT_IIC_ON  0     //启动整个软件IIC    
+#if(ABS_SOFT_IIC_ON)
+/****************************配置区(BEGIN)****************************************/
+/*------导入你需要的头文件(BEGIN)------*/
+#include "main.h"
+/*------导入你需要的头文件(END)--------*/
+
+
+#define ABS_IIC_DELAY_TIME               10
+#define ABS_IIC_Wait_OUTTime              2000
+
+/*1、按选择自己的需求定义SDA线和SCL线的函数，建议用推挽输出*/
+#define ABS_IIC_SDA_Set()                                    HAL_GPIO_WritePin(GPIOB,GPIO_PIN_8,GPIO_PIN_SET)         //定义你的SDA引脚设置高电平函数    
+#define ABS_IIC_SDA_Reset()                                  HAL_GPIO_WritePin(GPIOB,GPIO_PIN_8,GPIO_PIN_RESET)         //定义你的SDA引脚设置低电平函数    
+#define ABS_IIC_SCL_Set()                                    HAL_GPIO_WritePin(GPIOB,GPIO_PIN_9,GPIO_PIN_SET)         //定义你的SCL引脚设置高电平函数   
+#define ABS_IIC_SCL_Reset()                                  HAL_GPIO_WritePin(GPIOB,GPIO_PIN_9,GPIO_PIN_RESET)         //定义你的SCL引脚设置低电平函数 
+
+#define ABS_IIC_SDA_READ()                                   HAL_GPIO_ReadPin(GPIOB,GPIO_PIN_8)
+/*2、到抽象实现区实现SDA引脚的输入输出模式的改变函数*/
+
+/****************************配置区(END)******************************************/
+
+typedef enum _ABS_sotfiic_state{
+    ABS_IIC_STATE_ACK       = 0U,
+    ABS_IIC_STATE_NACK      = 1U,
+    ABS_SOFT_IIC_TIMEOUT    = 2U,
+    ABS_SOFT_IIC_SUCCESS    = 3U,
+    ABS_SOFT_IIC_ERROR      = 4U,
+}   ABS_SOFT_IIC_STATE;
+
+
+
+/****************************函数声明区(BEGIN)************************************/
+ABS_SOFT_IIC_STATE ABS_I2C_WR_Byte(uint8_t address,uint8_t dat);                          //发送一个字节数据
+ABS_SOFT_IIC_STATE ABS_I2C_WR_Bytes(uint8_t address,uint8_t *dat,uint8_t num);            //发送多个字节数据
+ABS_SOFT_IIC_STATE ABS_I2C_RD_Bytes(uint8_t address,uint8_t *dat,uint8_t num);
+/****************************函数声明区(END)**************************************/
+#endif //ABS_SOFT_IIC_ONL
+#endif
diff --git a/通讯协议/软件IIC/README.md b/通讯协议/软件IIC/README.md
new file mode 100644
index 0000000..e69de29